ISO 20344 EN 388 Gloves Cut Resistance Testing Machine
Gloves Cut Resistance Testing Machine , is used to determine the cut resistance property of materials from protective gloves, but not suitable for hard materials. Specimens are cut by a rotating round blade, which moves with a reciprocating motion under a specified load.
Relatived Standards: ISO 20344 EN 388
ISO 2061 Manual Yarn Reeling Twist Tester
Manual Yarn Reeling Twist Tester applies to determine yarn twist in double or plied yarns by direct counting method. Test length adjustable up to 300mm for S & Z twist yarns.
Related Testing Standard: ISO 2061
ISO 2094 Dynamic Loading Machine
Dynamic Loading Machine is used together with Carpet Thickness Tester to determine the thickness loss of textile floor coverings under dynamic loading.
Related Testing Standard:ISO 2094
ISO 22958 AATCC 35 Fabric Textile Rain Proof Tester
ISO 22958 AATCC 35 Fabric Textile Rain Proof Tester is used to measure the water repellency of fabrics or composites under different rain pressures.
ISO 2313 Fabric Textile Crease Recovery Tester
ISO 2313 Fabric Textile Crease Recovery Tester and Loading Device,This instrument is suitable for all kinds of textile fabrics, not suitable for particularly soft or easily rolled up fabrics.
ISO 3005 BS 4342 Steam Shrinkage Test Machine
Steam shrinkage test machine. Used for determination of dimensional change of fabrics when subjected to the action of free-steam, it’s applicable to test of woven fabrics, knitted fabrics and those fabrics which have poor dimensional stability.
Related Testing Standard:ISO 3005 BS 4342
ISO 3005 BS4323 FABRIC STEAM SHRINKAGE TESTER
ISO 3005 Fabric Textile Vapor Shrinkage Tester
ISO 3005 Fabric Textile Vapor Shrinkage Tester It is used to test the dimensional changes of woolen fabrics and woven fabrics after steaming.
ISO 3060 Fiber Testing Fiber Bundle Strength Tester
Pressley Fiber Bundle Strength Tester is an equipment based on the principle of moment balance measuring force, and use a ramp-type device where a hammer slides freely to measure bundle cotton breaking strength by the distance that the hammer slides.
Related Testing Standard: ISO 3060
ISO 3801 EN 12127 Circular Fabric Sample Cutter
Circular Sample Cutter is used to cut out circular specimens of fixed diameter rapidly, accurately and safely. Virtually any type material can be accommodated, including woven, non-woven and knitted textiles, carpet, film, foam, plastics, paper and board etc.
Related Testing Standard:ISO 3801 EN 12127
ISO 4892-2, AATCC TM16 Color Fastness To Sunlight Tester
Xenon Light Fastness Tester is mainly used for test of the color fastness to light and weather fastness of all kinds of nonferrous, coloring textile; it can also be used for testing the color fastness and aging of painting, pigment, paint, rubber, plastic, paper and other materials
Related Testing Standard:
ISO105-B02/B04/B06, AATCC 16, JIS L0843, ISO 4892-2, AATCC TM16
ISO 4892-2006 Xenon Arc Lamp Weather Resistant Aging Tester
Air Cooled Xenon Arc Lamp Weather Resistant Aging Tester is designed to simulate and strengthen sunlight spectrum that reaches the ground by xenon arc lamp as light source, and supplemented by temperature and humidity control, and water spray conditions. This kind of xenon tester is suitable for various kinds of materials, such as textile, leather, plastic, rubber, painting, dyestuff etc.
Related Testing Standard : ISO 4892-2006
- Home
- Products
- ELECTROMECHANICAL UNIVERSAL TESTING MACHINE
- HYDRAULIC UNIVERSAL TESTING MACHINE
- CIVIL ENGINEERING INSTRUMENT
- TEXTILE TESTING MACHINE
- DYNAMIC TESTING MACHINE
- HARDNESS TESTER
- IMPACT TESTING MACHINE
- NDT Instrument
- LEATHER AND FOOTWEAR TESTING MACHINE
- COMPRESSION TESTING MACHINE
- PLASTIC TESTING INSTRUMENT
- HORIZONTAL TESTING BED
- CUPPING TESTING MACHINE
- REBAR TENSILE AND BENDING TESTING MACHINE
- TORSION TESTING MACHINE
- TESTING MACHINE ACCESSORIES
- METALLURGICAL EQUIPMENT
- About Us
- News
- Contact Us
