ASTMD1238 Plastic Melt Flow Index Tester
Melt flow rate meter is in the specified temperature conditions, with high-temperature furnace to melt the state of the measured object. The molten state of the measured object, the required weight load by gravity out of a certain diameter hole in the test. Plastics in industrial enterprises and scientific research units of production, often with “melt (mass) flow rate” to represent the polymer material in the molten state of fluidity, viscosity and other physical properties. Melt flow rate refers to the extrudate, the average quality of the sample paragraphs are translated into 10 minutes of extrusion volume. Melt (mass) flow rate expressed by MFR, unit: g / 10 minutes (g / min)
Melt Flow Index Tester
- Melt Flow Index Tester
- Measuring range: 0. 01-600.00 g/10min (MFR) 0. 01-600.00 cm/10min (MVR)
0.001-9.999 g/cm (melt density) - Piston diameter 9.457±0.01mm mass:106g
- Home
- Products
- ELECTROMECHANICAL UNIVERSAL TESTING MACHINE
- HYDRAULIC UNIVERSAL TESTING MACHINE
- CIVIL ENGINEERING INSTRUMENT
- TEXTILE TESTING MACHINE
- DYNAMIC TESTING MACHINE
- HARDNESS TESTER
- IMPACT TESTING MACHINE
- NDT Instrument
- LEATHER AND FOOTWEAR TESTING MACHINE
- COMPRESSION TESTING MACHINE
- PLASTIC TESTING INSTRUMENT
- HORIZONTAL TESTING BED
- CUPPING TESTING MACHINE
- REBAR TENSILE AND BENDING TESTING MACHINE
- TORSION TESTING MACHINE
- TESTING MACHINE ACCESSORIES
- METALLURGICAL EQUIPMENT
- About Us
- News
- Contact Us