Handheld ATP Fluorescence Detector bacteria germ meter tester

Handheld ATP Fluorescence Detector bacteria germ meter tester

The device is a new upgrade with a large touch screen instead of a traditional button. ATP content was detected by biochemical reaction.

  • Description
  • Inquiry

Product introduction
The device is a new upgrade with a large touch screen instead of a traditional button. ATP content was detected by biochemical reaction. ATP fluorescence detector was based on the principle of firefly luminescence, and ATP was rapidly detected by “luciferase – luciferin system”. ATP can swab contains pyrolysis membranes of reagent, the ATP in the cell can be released, react with the specificity of the reagent containing enzymes, produce light, reoccupy glow fluorescent light meter test values, the number of microorganisms is proportional to the luminous value, because all creatures living cells contain a constant ATP, so ATP content can clearly show that the residual of microorganisms and other organisms in the sample, used to judge the health聽situation.

Instrument features
Practicability聽—聽the upper and lower limits can be set according to the environmental testing requirements, so as to achieve rapid data evaluation and early warning, and rapid surface cleanliness screening.

High sensitivity聽—聽10-15 to 10-18 mol

Fast聽–聽conventional culture method 18-24h, and ATP only need a few seconds.

Feasibility聽—聽there is a clear correlation between the number of microorganisms and the ATP contained in the microorganisms. By measuring the content of ATP, the microbial quantity in the reaction can be obtained indirectly

Operability聽–聽traditional training methods need to be operated by trained technicians in the laboratory; And ATP fast cleanliness detection operation is very simple, only simple training can be carried out by the general staff on-site operation.

Better experience聽— the test sleeve adopts the flexible design of plug and pull, which can be cleaned regularly and used for a long time to extend the service life of the instrument.

The product application
ATP fluorescence detector is widely used in food, medicine and health, medicine, daily chemicals, papermaking, industrial water treatment, national defense, environmental protection, water administration, customs entry-exit quarantine and other law enforcement departments and other industries.聽

Product configuration

ATP fluorescence detector (hand-held) host, aluminum alloy suitcase, drive U disk, PC data line, data analysis software, English operation manual.

 

 

Display3.5-inch high-precision graphic touch screen
Processor32-bit high-speed data processing chip
Detection accuracy1脳10-18mol
Coliform1-106cfu
Detection range0 to 9999 RLUs
Detection time15 seconds聽聽聽
Detection of interference+/-5% or +/-5RLUs
Operating temperature range5C聽to 40C
Operating humidity range20-85%RH
ATP recovery rate:90-110%
Detection modeRLU and coliform screening
Result limits that can be set251
FunctionAutomatic judgment of qualified and unqualified
 Automatic statistical pass rate
 Built-in self-aligning light source
 Self-check after starting for 30 seconds
 Equipped with mini聽USB interface, the results can be uploaded to the PC
 Use rechargeable lithium batteries without battery replacement
 Equipped with special software to drive the U disk instead of the traditional CD
Dimension188 mm脳77mm脳37mm

 

 

Contact Us