ISO 3880 Leather Shrinkage Temperature Tester
聽Leather shrinkage temperature tester聽is used to determine the shrinkage temperature of leather heated at a specified rate in water.
Related Testing Standard :ISO 3880聽
- Description
- Inquiry
Application:聽
聽Leather shrinkage temperature tester聽is used to determine the shrinkage temperature of leather heated at a specified rate in water.
聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽
Features:
1,聽Convenient and easy to operate;
2,聽High precision temperature sensor;
3,聽Equip with heater, temperature can be set freely.
Leather Shrinkage Temperature Tester Parameter :
| Vessel volume | 500ml |
| Mass | 3g heavier than the moveable holder |
| Magnification | 5.3 |
| Temperature range聽聽 | 0~99掳C (adjustable) |
| Temperature increasing rate | 2掳C/min (adjustable) |
| Stirring speed | Adjustable |
| Distance between the fixed test piece holder and bottom of the vessel | 30卤5mm
|
| Power supply | AC220V, 50Hz |
| Weight | About 6 kg |
Related Products
EN ISO 20344 Shoes Flexing Resistance Testing Machine
Whole Shoes Flexing Resistance Testing Machine聽is used to determine the resistance of materials to cut growth during repeated flexing. It is especially applicable to outsoles of footwear including sole constructions.
Related Testing Standard:聽EN ISO 20344
SATRA TM133 Shoes Sole Bending Tester Belt Type
Shoes Sole Bending Tester Belt Type is used to determine the resistance of flexible soles whose insection height is more than 2.5mm to crack after continuous flexing by the belt flex method.
ASTM D2099 SATRA PM34 Maeser Water Penetration Tester
Maeser Water Penetration Tester聽is used to determine the dynamic water penetration of shoe upper leather.
Related Testing Standard:ASTM D2099 SATAR PM34
ISO 20344 5.12 Shoes Sole Thermal Heat Insulation Resistance Tester
Heat聽 Insulation Resistance Tester聽is used to determine the resistance of the shoe material to heat.聽
Related Testing Standard:ISO 20344 5.12
ISO 3379,17235 Footwear Lastometer
Footwear Lastometer 聽is used to determine distension and strength of leather grain. It is applicable to boot and shoe upper leather and light leather. It uses the clamping ring and cap to clamp round specimen and a steel ball to press against the centre of the flesh side of the specimen. The pressure and distension produced are recorded at grain crack and at burst (if bursting occurs).聽
Related Testing Standard:聽ISO 3379,17235
ASTM D1052 ISO 5423 Rubber Shoes Sole Ross Flexing Tester
Shoes Sole Ross Flexing Tester聽聽is used for flexing test at a 90掳angle of rubber products, sole materials, PU, etc. by subjecting specifically prepared specimens to repeated bend flexing.聽The damage and cracking condition is then observed.
Related Testing Standard:ASTM D1052 ISO 5423
ASTM D813/D430 BS 903, BS ISO123 Leather Fatigue testing machine
Leather Fatigue testing machine 聽is used to determine the ability of soft rubbers, leathers, artificial leathers and EVA soles and other materials to resist dynamic fatigue.
Related Testing Standard:ASTM D813/D430 JIS-K6301 BS 903, BS ISO123 BS 903,聽 BS ISO123
Footwear Adhesive Peel Strength Tester
Footwear adhesive peel strength tester聽applies to determine the peeling strength between upper and sole. A shoe with last is peeled by a knife; meanwhile the peeling strength is calculated base on the peeling force and knife edge width.聽聽
ISO 20344 Safety footwear impact testing machine
聽聽Safety footwear impact testing machine聽 This machine research and development is based on EN, ANSI, BS, CSA standard. Apply 100J or 200J of kinetic energy to safety footwear and then examine their deformation in order to understand the quality and safety.
Related Testing Standard:聽ISO 20344
ASTM F489 ISO 20344 JAMES SLIP RESISTANCE TESTER
JAMES SLIP RESISTANCE TESTER聽is used to聽determine the dry static coefficient of friction of shoe and heel materials on controlled walking surfaces and under controlled conditions.
