The design of the mainframe and auxiliary equipment of the electronic universal testing machine draws on the technology of Shimadzu, Japan, with good looking appearance, convenient operation, stable and reliable performance. The electronic tensile testing machine is composed of a measuring system, a driven system, a control system, and a computer.
The working principles are as follows:
Deformation measurement
It is measured by a deformation measuring device, which is used to measure the deformation of the sample during the test.
There are two chucks on the device, which are connected to the photoelectric encoder mounted on the top of the measuring device through a series of transmission mechanisms. When the distance between the two chucks changes, the shaft of the photoelectric encoder is driven to rotate, the photoelectric encoder There will be a pulse signal output. The signal is processed by the single-chip microcomputer, and the deformation of the sample can be obtained.
Beam displacement measurement
The principle is roughly the same as the deformation measurement, and the displacement of the beam is obtained by measuring the number of output pulses of the photoelectric encoder.
Drive System
It is mainly used for the movement of the beam of the testing machine. Its working principle is that the servo system controls the motor. The motor drives the screw to rotate through a series of transmission mechanisms such as a reduction box, so as to achieve the purpose of controlling the movement of the beam. By changing the speed of the motor, the moving speed of the beam can be changed.
The working principle of electronic universal material testing machine
Control System
As the name implies, it is a system that controls the operation of the testing machine. People can control the operation of the testing machine through the console. The status of the testing machine and various test parameters can be obtained through the display screen. If the machine is equipped with a computer, it can also be implemented by the computer. Item function and data processing analysis, test results printing. The communication between the testing machine and the computer generally uses the RS232 serial communication method, which communicates through the serial port (COM number) on the back of the computer. This technology is relatively mature, reliable and easy to use.
Computer host
It is used to collect and analyze data. After entering the test interface, the computer will continuously collect various test data, draw test curves in real time, automatically calculate various test parameters and output reports
