Bitumen Vacuum Pycnometer Asphalt Specific Gravity Tester
- Description
- Inquiry
Introduction:
Bitumen Vacuum Pycnometer Asphalt Specific Gravity Tester聽 Transparent plexiglass made, complete with valve and gauge, it is utilized for a rapid determination of asphalt content, bulk specific gravity of aggregates, the max. theoretic specific gravity of bituminous uncompacted road mixtures and the percent air voids in compacted mixtures.
Parameter:
Product name | Bitumen Vacuum Pycnometer |
Power supply voltage | 聽220v卤10鈩 50Hz |
Vibration motor input power | 40w |
Digital vacuum gauge | negative pressure range: 0 — -100kpa |
Experimental requirements | 3.7Kpa(卤0.3) |
Working method | Manual |
Container volume | 10000ml (stainless steel barrel / acrylic barrel) |
Vibration mode | continuous vibration |
Related Products
Multifunction Ultrasonic Concrete Crack Width and Depth Gauge
Los Angeles Fragmentation Abrasion Machine
ASTM Standard Digital Display Los Angeles Fragmentation Abrasion Machine聽is for measuring aggregate toughness and abrasion resistance, crushing, degradation an disintegration.
Multifunction Pull Off Bond Strength Tester
40 kN Multifunction Pull Off Bond Strength Tester For Concrete Testing聽It is mainly used to detect the strength of concrete after installation and pull out, and to inspect the bonding strength of concrete facing bricks, mosaics, and wall or ground and the strength of concrete, chemical anchor drawing test.
This instrument is a small hydraulic force-measuring device. When testing the adhesive strength of decorative bricks, the three-point counterforce support is used to generate tensile force on the adhesive material of decorative bricks. The concrete is tested by using the principle of post-installation and extraction. The force required to anchor the concrete in the concrete is used to calculate the strength of the concrete.
The instrument consists of a through-hearth jack, a hand pump, a triangular chassis, and a force measuring device. It has the characteristics of one machine and two uses, a novel structure, small size, convenient operation and complete functions.Paint Coating and Various Plates Pull Off Bond Strength Tester
Paint Coating and Various Plates Pull Off Bond Strength Testing Instrument聽is used to test the bonding strength of decorative bricks, tiles, mosaics, various plates, paints, coatings, exterior wall insulation materials (EPS panels, SPS panels) and also be used to test the bonding strength of various exterior wall building materials and adhesives.
Marshall Asphalt Impact Compactor
Automatic Electric Marshall Asphalt Compaction Apparatus/ Marshall Asphalt Impact Compactor聽is聽a聽special聽equipment聽for聽specimen聽forming聽in聽Marshall聽test聽of聽asphalt聽mixture.
The聽instrument聽panel聽is聽equipped聽with聽preset聽switch,聽digital聽display,聽start,聽stop聽and聽pause聽buttons.聽The聽compaction聽instrument聽can聽automatically聽compact聽according聽to聽the聽preset聽compaction聽times,聽and聽automatically聽cut聽off聽the聽control聽circuit聽and聽turn聽off聽the聽motor聽when聽the聽set聽value聽is聽reached.Asphalt Bitumen Non-nuclear Electronic Density Gauge (EDG)
The EDG-2A non-nuclear asphalt density tester can quickly detect areas where road surface segregation, low density, and unevenness occur. The use of electromagnetic induction technology instead of nuclear source radiation method, low cost, high security, users do not have to worry about cumbersome environmental assessment applications, time-consuming training, and strict transportation control. The calibration is simple, the precision is high, the repeatability is good, the touch screen operation, the user can complete the relevant operation training in a short time, and master the technology of on-site quality inspection.
Digital Concrete Slab Thickness Gauge
Digital Concrete Slab Thickness Gauge is a portable instrument suitable for non-destructive testing of concrete or other non-ferromagnetic medium thickness measurement;When in use, the transmitting probe and the receiving probe are placed on two opposite test surfaces of the floor respectively to transmit and receive electromagnetic signals. The instrument measures the thickness of the floor according to the received signal strength.
Lab Horizontal Bituminous Asphalt Mixture Mixer
Automatic Lab Horizontal Bituminous Asphalt Mixture Mixer聽used in laboratories such as scientific research, production, collegess and universities, construction, supervision.
Soil Electric Density Gauge(EDG) With GPS
High Precision Non nuclear Soil Electric Density Gauge(EDG) With GPS聽 that measures the physical properties of the roadbed and foundation compaction soils. It is a battery-driven portable instrument that can be used anywhere in the world without causing nuclear safety and other related issues. Measure and display dry / wet density, moisture content, and compaction percentage. Easy to use, can be used as a building auxiliary equipment to monitor the daily compaction operation, its high quality work performance and accurate measurement results can be with the traditional measurement methods, such as nuclear density measurement method, sand filling method, and drying method comparable.
Measure the physical properties of compacted materials, including density, moisture content, and percent compaction. Including: roadbed and foundation, embankment and filling, underground and basement, backfill and ditches, garbage and so on.
Concrete Resistivity Tester
Concrete resistivity tester is also called potential detector. The corrosion of steel bar/ reinforcement in concrete is an electrochemical process, it creates an electric current to make metal dissociation. The lower the resistivity, the easier corrosion current flowing through the concrete, and the greater the likelihood of corrosion. So measuring the resistivity of concrete can effectively evaluate its ability to resist corrosion and evaluate existing steel corrosion degree.
