Internal Pump Handheld 4 in 1 NH3 H2S CO CH4 Multi Gas Analyzer
- Description
- Inquiry
Feature:
3.5 inch high-definition color screen
1). The outer casing is made of aviation wear-resistant material
2). Adopt 3.5-inch high-definition color screen, high resolution, wide viewing angle
Flashlight function
Exclusive design – a flashlight function that illuminates the darkness for certain workplaces and make Underground work easier
Multi-gas test, display mode switch (USED FOR MULTI-GAS)
It can simultaneously detect up to 1-4 gas concentrations
Data show that the gas concentration, gas concentration curve in real time display mode can be arbitrarily switched
Flexible and adjustable pumping system
Built-in gas sampling pump, the pump’s flow rate is adjustable in ten steps, which can customize the gas detection flow for different detection environments.
Multi-layer filter
Three-layer filter unit is built in to efficiently filter oil, water, dust and other impurities. Even in the most demanding industrial environment, the test results can still be trusted.
Multiple gas display units
Multiple gas display units can be switched, converted the concentration value automatically
Powerful, more user-friendly operation
1). With timed shutdown function, intelligent settings
2). Sensor overload automatic protection
3). USB charging interface design can be charged anytime, anywhere
Optional function
1). Optional fall alarm function to ensure the safety of underground workers is more secure
2). Optional 8G large-capacity memory card, support one-click download function, if with 4 kinds of gases, Storage interval time is 5s, can be used for 7 years! And this function is standard provided if the detector with optional air sampling rod
3). Optional PC storage software download, analysis and storage data, with excel format
4). Optional external Bluetooth printer
Parameter:
Detecting gas | NH3, CO, H2S, CH4 |
Sensors | catalytic combustion(CH4),Electrochemistry(H2S,NH3,CO) |
| Measure range | 0-100ppm,0-1000ppm,0-100ppm,0-4%vol |
Resolution | 0.1ppm ,1ppm, 0.1ppm,1%vol |
Display | formula, unit, measurement value, time, battery, alarm status, data recording status, historical data curve, pump working state, alarm status, etc |
Sampling | Built-in pump suction sampling, select high-quality micro pump, small noise and vibration. Suction can reach 1L/min. |
Alarm | Buzzer, low battery alarm, White flash and alarm status on display |
Data storage | Various storage way are optional, large capacity of 8G memory card are optional. Support one key download function, optional PC storage software download and analysis data, storage data format diversification, |
Data transmission | USB interface data transmission, with the upper computer software, can download and print data, support the memory card transmission data in one key |
Print function(Optional) | Optional with internal portable printer or external bluetooth printer |
Print content(Optional) | Text, graphics, one-dimensional code, two-dimensional code, curves, characters, etc. |
Charger | Standard Mini-USB charging port. The commonly used car charger, mobile power supply and common mobile phone charging line can be charged for it |
Language | Chinese/English |
Wireless network (optional) | Bluetooth, Zigbee |
| Network frequency | 2.4G high frequency. |
wireless transmission distance | Bluetooth is less than 10m, and the ZigBee outdoor single point is less than 500m. |
Related Products
ASTM D4061 Traffic Road Retro Reflectometer
Digital Traffic Road Retro Reflectometer for Marking Line and Vertical Sign is a professional measuring instrument used to measure the reflectivity of road markings. The measured parameters are the retroreflective coefficient R’or the specific brightness of the marking line in mcd. lx-1. m-2. The instrument is simple to operate and reliable in measurement. It can be used not only in laboratory environment, but also in field measurement. It is an optimum instrument for measuring the reverse reflection performance of pavement markings, such as production, quality supervision, engineering construction and supervision units.
Paint Coating and Various Plates Pull Off Bond Strength Tester
Paint Coating and Various Plates Pull Off Bond Strength Testing Instrument is used to test the bonding strength of decorative bricks, tiles, mosaics, various plates, paints, coatings, exterior wall insulation materials (EPS panels, SPS panels) and also be used to test the bonding strength of various exterior wall building materials and adhesives.
Asphalt Bitumen Non-nuclear Electronic Density Gauge (EDG)
The EDG-2A non-nuclear asphalt density tester can quickly detect areas where road surface segregation, low density, and unevenness occur. The use of electromagnetic induction technology instead of nuclear source radiation method, low cost, high security, users do not have to worry about cumbersome environmental assessment applications, time-consuming training, and strict transportation control. The calibration is simple, the precision is high, the repeatability is good, the touch screen operation, the user can complete the relevant operation training in a short time, and master the technology of on-site quality inspection.
Concrete Rebar Scanner
Portable Integrated Concrete Rebar Scanner Concrete Locator Concrete Rebar Detector For Concrete Cover Meter are mainly used for detecting the internal reinforcement position, the protective layer thickness, reinforcement spacing and diameter of rebar.
Portable O3 Ozone Leakage Tester
Feature
1. Using imported high-precision sensor, can simultaneously detect two, three or four gas
2. LCD dot matrix display technology
3. English operation interface
4. Gas concentration measurement units PPM, mg/m3 can quickly switch
5. Built-in micro sampling pump
6. Explosion-proof grade: Exia II CT4
Penetration Mortar Concrete Compressive Strength Tester
Handle Penetration Mortar Concrete Compressive Strength Tester is suitable for masonry mortar strength testing and concrete strength testing. A new type of on-site detection method that uses the lever-type baster force method to penetrate the nail into the mortar and converts the compressive strength of the mortar through the penetration depth of the nail and the strength curve.
Portable Ultrasonic Flaw Detector
Ultrasonic Flaw Detector This is a portable industrial non-destructive flaw detector, which can rapidly, easily and accurately inspect, locate, evaluate and diagnose various defects (crack, inclusion and pinhole, etc.) in a workpiece without destruction
Multifunction Ultrasonic Concrete Crack Width and Depth Gauge
Concrete Crack Depth Gauge
Concrete Crack Depth Gauge Crack Depth Measuring Meter Instrument is mainly widely used for crack depth measurement of bridges, tunnels, buildings and so on
- Two detection methods: standard and simple depth measurement.
- Standard ultrasonic transducer bracket, precise and adjustable; free from scene marking-out, which can greatly improve the detection efficiency.
- Touch screen makes the operation simple and quick.
- Whole process of testing is prompted by voice and text;
- Friendly human-computer interactive interface
- Various built-in various helpful files and demo videos facilitate the users to conduct skilled instrument operation.
- 4GB large-capacity SD card can store more than 100,000 data;
- Powered by lithium batteries;
Concrete Steel Bar Rebar Location and Corrosion Detector
Concrete Steel Bar Rebar Location and Corrosion Detector Integrate the functions of rebar position test , concrete thickness test, rebar diameter test and rebar corrosion degree test into one product.
