Lab Horizontal Bituminous Asphalt Mixture Mixer
Automatic Lab Horizontal Bituminous Asphalt Mixture Mixer聽used in laboratories such as scientific research, production, collegess and universities, construction, supervision.
- Description
- Inquiry
Automatic Lab Horizontal Bituminous Asphalt Mixture Mixer聽used in laboratories such as scientific research, production, collegess and universities, construction, supervision.
Parameter:
| Product Name | Horizontal Bituminous Asphalt Mixture Mixer |
| Mixing capacity | 10 L /20 L |
| Heating pot temperature range | room temperature -250鈩 (set at will) |
| Temperature control accuracy | 卤3鈩 |
| Mixing time | 1 ~ 9999 seconds (arbitrary setting) |
| Speed of agitator | 48 revolutions per minute;80 rotations per minute |
| Work Temperature | – 10 鈩 to 40 鈩 |
| Relative humidity | no more than 80% |
| Supply voltage | ~ 220V卤10% or customized |
Related Products
Multifunction Pull Off Bond Strength Tester
40 kN Multifunction Pull Off Bond Strength Tester For Concrete Testing聽It is mainly used to detect the strength of concrete after installation and pull out, and to inspect the bonding strength of concrete facing bricks, mosaics, and wall or ground and the strength of concrete, chemical anchor drawing test.
This instrument is a small hydraulic force-measuring device. When testing the adhesive strength of decorative bricks, the three-point counterforce support is used to generate tensile force on the adhesive material of decorative bricks. The concrete is tested by using the principle of post-installation and extraction. The force required to anchor the concrete in the concrete is used to calculate the strength of the concrete.
The instrument consists of a through-hearth jack, a hand pump, a triangular chassis, and a force measuring device. It has the characteristics of one machine and two uses, a novel structure, small size, convenient operation and complete functions.Automatic Asphalt Marshall Stability Compression Tester
The Marshall stability tester is suitable for measuring the thermal stability and resistance to plastic deformation of asphalt mixture-stability and flow value. Provide an accurate basis for the design of the composition ratio of the asphalt mixture.
Concrete Steel Bar Rebar Location and Corrosion Detector
Concrete Steel Bar Rebar Location and Corrosion Detector Integrate the functions of rebar position test , concrete thickness test, rebar diameter test and rebar corrosion degree test into one product.
Digital Concrete Slab Thickness Gauge
Digital Concrete Slab Thickness Gauge is a portable instrument suitable for non-destructive testing of concrete or other non-ferromagnetic medium thickness measurement;When in use, the transmitting probe and the receiving probe are placed on two opposite test surfaces of the floor respectively to transmit and receive electromagnetic signals. The instrument measures the thickness of the floor according to the received signal strength.
ASTM D5, AASHTO T49 Asphalt Bitumen Needle Penetration Meter
Intelligent Digital Asphalt Bitumen Needle Penetration Meter聽聽聽is mainly used for the penetration of viscous road petroleum asphalt, liquid petroleum, asphalt and asphalt materials after distillation or emulsification tests.
Concrete Resistivity Tester
Concrete resistivity tester is also called potential detector. The corrosion of steel bar/ reinforcement in concrete is an electrochemical process, it creates an electric current to make metal dissociation. The lower the resistivity, the easier corrosion current flowing through the concrete, and the greater the likelihood of corrosion. So measuring the resistivity of concrete can effectively evaluate its ability to resist corrosion and evaluate existing steel corrosion degree.
Soil Electric Density Gauge(EDG) With GPS
High Precision Non nuclear Soil Electric Density Gauge(EDG) With GPS聽 that measures the physical properties of the roadbed and foundation compaction soils. It is a battery-driven portable instrument that can be used anywhere in the world without causing nuclear safety and other related issues. Measure and display dry / wet density, moisture content, and compaction percentage. Easy to use, can be used as a building auxiliary equipment to monitor the daily compaction operation, its high quality work performance and accurate measurement results can be with the traditional measurement methods, such as nuclear density measurement method, sand filling method, and drying method comparable.
Measure the physical properties of compacted materials, including density, moisture content, and percent compaction. Including: roadbed and foundation, embankment and filling, underground and basement, backfill and ditches, garbage and so on.
ASTM D4061 Traffic Road Retro Reflectometer
Digital Traffic Road Retro Reflectometer for Marking Line and Vertical Sign is a professional measuring instrument used to measure the reflectivity of road markings. The measured parameters are the retroreflective coefficient R’or the specific brightness of the marking line in mcd. lx-1. m-2. The instrument is simple to operate and reliable in measurement. It can be used not only in laboratory environment, but also in field measurement. It is an optimum instrument for measuring the reverse reflection performance of pavement markings, such as production, quality supervision, engineering construction and supervision units.
Penetration Mortar Concrete Compressive Strength Tester
Handle Penetration Mortar Concrete Compressive Strength Tester聽is suitable for masonry mortar strength testing and concrete strength testing. A new聽type of on-site detection method that uses the lever-type聽baster聽force method to penetrate the nail into the mortar and converts聽the compressive strength of the mortar through the penetration depth of the nail and the strength curve.
Paint Coating and Various Plates Pull Off Bond Strength Tester
Paint Coating and Various Plates Pull Off Bond Strength Testing Instrument聽is used to test the bonding strength of decorative bricks, tiles, mosaics, various plates, paints, coatings, exterior wall insulation materials (EPS panels, SPS panels) and also be used to test the bonding strength of various exterior wall building materials and adhesives.
