Paint Coating and Various Plates Pull Off Bond Strength Tester
Paint Coating and Various Plates Pull Off Bond Strength Testing Instrument is used to test the bonding strength of decorative bricks, tiles, mosaics, various plates, paints, coatings, exterior wall insulation materials (EPS panels, SPS panels) and also be used to test the bonding strength of various exterior wall building materials and adhesives.
- Description
- Inquiry
Paint Coating and Various Plates Pull Off Bond Strength Testing Instrument is used to test the bonding strength of decorative bricks, tiles, mosaics, various plates, paints, coatings, exterior wall insulation materials (EPS panels, SPS panels) and also be used to test the bonding strength of various exterior wall building materials and adhesives.
Parameter
0~6.000KN/3.75Mpa | |
Display | Mpa and Kn |
Accuracy | 0.001KN |
Hollow cylinder stroke | 10mm |
Instrument structure | One-piece |
Main material | Alloy material |
Body weight | 2.0kg |
Configurator display mode | Digital |
Data store | 200 items |
Data check and delete function | yes |
Peak holding function | yes |
LCD lighting function | yes |
Battery | lithium battery |
Polyline correction | 10 section |
USB charging | yes |
Related Products
Portable 4 in 1 CO O2 H2S EX Multi Gas Detector
Feature:
1)Employ original imported high-precision sensor.2)Four random gas sensors can be combined freely.3)LCD dot matrix display, support Chinese and English operation.4)The gas concentration unit PPM and mg/m3 can be shifted quickly.5)The battery and voltage can be checked by one press.6)One press to restore factory settings.7)Ultra-high buzzer alarm sound, alarm with sound, light and vibration at the same time.8)Can record 10000 alarm data, Data storage function, historical data can be viewed on the device (optional function).9)Rechargeable lithium polymer battery of large capacity, which ensure the device to work continuously for a long time.10)Strong and upscale alligator clip, convenient to take along during operation.11)Special engineering plastics housing of high intensity, strong and durable, exquisite and comfortable in touching.Multifunction Pull Off Bond Strength Tester
40 kN Multifunction Pull Off Bond Strength Tester For Concrete Testing It is mainly used to detect the strength of concrete after installation and pull out, and to inspect the bonding strength of concrete facing bricks, mosaics, and wall or ground and the strength of concrete, chemical anchor drawing test.
This instrument is a small hydraulic force-measuring device. When testing the adhesive strength of decorative bricks, the three-point counterforce support is used to generate tensile force on the adhesive material of decorative bricks. The concrete is tested by using the principle of post-installation and extraction. The force required to anchor the concrete in the concrete is used to calculate the strength of the concrete.
The instrument consists of a through-hearth jack, a hand pump, a triangular chassis, and a force measuring device. It has the characteristics of one machine and two uses, a novel structure, small size, convenient operation and complete functions.Concrete Resistivity Tester
Concrete resistivity tester is also called potential detector. The corrosion of steel bar/ reinforcement in concrete is an electrochemical process, it creates an electric current to make metal dissociation. The lower the resistivity, the easier corrosion current flowing through the concrete, and the greater the likelihood of corrosion. So measuring the resistivity of concrete can effectively evaluate its ability to resist corrosion and evaluate existing steel corrosion degree.
Carbon Dioxide Gas Detector Co2 Monitor Analysis Alarming Device
Portable Ultrasonic Flaw Detector
Ultrasonic Flaw Detector This is a portable industrial non-destructive flaw detector, which can rapidly, easily and accurately inspect, locate, evaluate and diagnose various defects (crack, inclusion and pinhole, etc.) in a workpiece without destruction
Soil Electric Density Gauge(EDG) With GPS
High Precision Non nuclear Soil Electric Density Gauge(EDG) With GPS that measures the physical properties of the roadbed and foundation compaction soils. It is a battery-driven portable instrument that can be used anywhere in the world without causing nuclear safety and other related issues. Measure and display dry / wet density, moisture content, and compaction percentage. Easy to use, can be used as a building auxiliary equipment to monitor the daily compaction operation, its high quality work performance and accurate measurement results can be with the traditional measurement methods, such as nuclear density measurement method, sand filling method, and drying method comparable.
Measure the physical properties of compacted materials, including density, moisture content, and percent compaction. Including: roadbed and foundation, embankment and filling, underground and basement, backfill and ditches, garbage and so on.
Concrete Rebar Scanner
Portable Integrated Concrete Rebar Scanner Concrete Locator Concrete Rebar Detector For Concrete Cover Meter are mainly used for detecting the internal reinforcement position, the protective layer thickness, reinforcement spacing and diameter of rebar.
Coating Adhesion Bonding Strength Tester
Coating Adhesion Bonding Strength Tester is a new type of instrument, which is mainly used in the detection of coating adhesion in the construction of high-speed rail projects. It is a necessary testing instrument for quality inspection and construction units.
Portable O3 Ozone Leakage Tester
Feature
1. Using imported high-precision sensor, can simultaneously detect two, three or four gas
2. LCD dot matrix display technology
3. English operation interface
4. Gas concentration measurement units PPM, mg/m3 can quickly switch
5. Built-in micro sampling pump
6. Explosion-proof grade: Exia II CT4
Pocket Rebar Detector Steel Bar Detector Scanner
LCD display Handheld Pocket Rebar Detector Steel Bar Detector Scanneruses an electromagnetic induction method, which can detect the rebar location and cover thickness & diameter accurately, store, transfer and analyze the real time test data. The model is the pinnacle of work with the modern simple design, incorporating the handy & durable features and sophisticated electronic technology.
Rebar detector is mainly used to test the location, distribution, direction, the thickness of rebar and the diameter of cover in concrete structure such as walls,columns, beam-slabs etc. It can also detect the location of pipelines and metal embedded parts. The multiple coil structure design make it more accurate&responsive and higher resolution.
