Plastic Rubber Dumbbell Specimen Making Machine
Plastic Rubber Dumbbell Specimen Making Machine聽suitable for making standard samples of semi-rigid and hard plastic non-metallic materials into dumbbell shape and rectangle shape. The blank of the sample is directly clamped in the corresponding fixture and milled close to the rotating milling cutter.
- Description
- Inquiry
Introduction:
Plastic Rubber Dumbbell Specimen Making Machine suitable for making standard samples of semi-rigid and hard plastic non-metallic materials into dumbbell shape and rectangle shape. The blank of the sample is directly clamped in the corresponding fixture and milled close to the rotating milling cutter.
聽
Dumbbell Specimen Making Machine
Parameter:
Milling聽cutter聽diameter:聽27mm;
Milling聽cutter聽speed:聽2800聽rpm;
Work聽table聽size:聽400mm脳400mm;
Sample聽thickness:聽1锝20mm;
Power:550W
Related Products
ASTM D1003 Economic Haze Meter
It is designed for plastic sheets, films, glasses, LCD panel, touch screen and other transparent and semi-transparent materials haze and transmittance measurement.
Standards: ASTM D1003/D1044,ISO13468/ISO14782,聽JIS K 7361/聽JIS K 7136,聽GB/T 2410-08
ASTM F2029 Plastic Packaging Film Heat Seal Tester
The聽Heat Tester requests and takes heat-press seal method to test heat-seal temperature, time and pressure of plastic film material, soft packaging laminated film and other laminated film.
Testing Standard:ASTM F2029聽
Dial Charpy Impact Tester
- Test Standard:ISO179
- Impact energy:7.5J, 15J, 25J, 50J
- Dial Charpy Impact Tester
ASTM D1003 Light Transmit Haze meter
The meter is applicable in all transparent and semitransparent parallel level material for testing transmittance and haze degree. It is designed according to GB2410-80, ASTMD1003-61 (1977), JISK7105 and so on
Melt Flow Index Tester
- Melt Flow Index Tester
- Measuring range: 0. 01-600.00 g/10min (MFR)聽0. 01-600.00 cm/10min (MVR)
聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽0.001-9.999 g/cm (melt density) - Piston diameter 9.457卤0.01mm mass:106g
ISO 179 ASTM d256 Electric Izod Impact Specimen Notch Sample Making Machine
Electric Izod Impact Specimen Notch Sample-making Machine 聽is the sampling machine producing notch sample used by charpy and izod impact tester to do the test of impact toughness of non- metallic materials
Plastic Pipe Hydrostatic and Burst Testing Machine
- Maximum. Capacity: 6MPa, 10MPa, 16MPa, 25MPa;
- Plastic Pipe Hydrostatic Pressure Testing Machine
- Constant Temp. Range: Room Temp.~95鈩兟爋r 20鈩儈95鈩
- Grips: Diameter of pipe:褎16- 褎630mm
ISO 11358 Multi Function Thermal Analyzer DT Analyzer TG Analyzer DSC
High Precision Carbon Black Content Analyzer For Polybutene Plastics This instrument is suitable for the determination of carbon black content in polyethylene, polypropylene, and polybutene plastics. The test of carbon black is obtained by the gravimetric analysis of the sample under the protection of nitrogen after high temperature decomposition. The instrument has the advantages of convenient use, simple operation, reliable work, accurate measurement and automatic temperature control. The content of carbon black is an important technical indicator in the performance of the product. The content has a certain effect on the hardness, elasticity, wear resistance and insulation of the material.
WDW-50S Computerized Ring Stiffness Testing Machine
- Load Capacity :50 kN
- Testing Material锛歳ing stiffness, ring softness and it’s inner deformation of plastic pipe
- Testing Standard锛毬營SO9969,聽ISO5893, ASTM D638, ASTM D790, ISO37, ASTM E4,聽ISO6892, ISO75000-1, EN 10002-4聽
- Computerized Ring Stiffness Testing Machine聽
ASTM D2732 Plastic Film Heat Shrinkage Tester
This instrument is professionally applicable to the determination of heat shrinking performance and dimensional stability of various films, heatshrinkable tubes, hard PVC films for tablets, and back-sheets in the fluid medium at different temperatures.
Testing Standard:ASTM D2732
