Dial Charpy Impact Tester
- Test Standard:ISO179
- Impact energy:7.5J, 15J, 25J, 50J
- Dial Charpy Impact Tester
- Description
- Inquiry
Product Description
Charpy impact tester can be used determine the impact ductility of nonmetallic materials, such as Rigid thermoplastic and thermosetting plastic, thermosetting plastic and thermoplastic after fiber-reinforced.
It is widely used in the industries of plastic products, plastic manufacture, petro chemical etc, University, scientific research institute and commodity inspection department.
Conform with standard: ISO179.
Technical specifications
| Model | XJJ-5 | XJJ-50 |
| Impact energy | 1J, 2J, 4J, 5J | 7.5J, 15J, 25J, 50J |
| Impact speed | 2.9m/s | 3.8m/s |
| Pendulum initial angle | 150° | 150° |
| Specimen span | 40, 60, 70, 95 (mm) | |
| Display type | Dial analog display | |
| Specimen clamping type | Charpy | |
| Standard Accessories | Load frame, pendulum(1J, 2J), (4J, 5J), supporting vice jaws, specimen centering plate, spanner, manual etc. | Load frame, pendulum(7.5J, 15J, 25J, 50J), moving supporting base, specimen centering plate, spanner, manual etc. |
Related Products
ASTM D1003 Light Transmit Haze meter
The meter is applicable in all transparent and semitransparent parallel level material for testing transmittance and haze degree. It is designed according to GB2410-80, ASTMD1003-61 (1977), JISK7105 and so on
ISO 179 ASTM d256 Electric Izod Impact Specimen Notch Sample Making Machine
Electric Izod Impact Specimen Notch Sample-making Machine  is the sampling machine producing notch sample used by charpy and izod impact tester to do the test of impact toughness of non- metallic materials
WDW-50S Computerized Ring Stiffness Testing Machine
- Load Capacity :50 kN
- Testing Material：ring stiffness, ring softness and it’s inner deformation of plastic pipe
- Testing Standard： ISO9969, ISO5893, ASTM D638, ASTM D790, ISO37, ASTM E4, ISO6892, ISO75000-1, EN 10002-4Â
- Computerized Ring Stiffness Testing MachineÂ
ASTM F2029 Plastic Packaging Film Heat Seal Tester
The Heat Tester requests and takes heat-press seal method to test heat-seal temperature, time and pressure of plastic film material, soft packaging laminated film and other laminated film.
Testing Standard:ASTM F2029Â
Plastic Packaging Bag Negative pressure Leak Tester
- Plastic Packaging Bag Sealing TesterÂ
- Vacuum Degree   0- 90kPa
- Gas Supply Pressure       0.5MPa～0.7MPa
HDT & VICAT Testing Machine
- HDT & VICAT Testing Machine
- Temperature range: room temperature~300°C
- Max temperature error: ±1°C
- Heating media: polydimethylsiloxane
ISO1409,ISO6295 Liquid Surface Tension Meter
The automatic tension meter is a simple and feasible test instrument which replaces the chemical method with the physical method. It can quickly and accurately measure the surface and interfacial tension of various liquids ,and the results can be displayed automatically.
Testing Standard:ISO1409,ISO6295Â
ASTM D1003 Economic Haze Meter
It is designed for plastic sheets, films, glasses, LCD panel, touch screen and other transparent and semi-transparent materials haze and transmittance measurement.
Standards: ASTM D1003/D1044,ISO13468/ISO14782, JIS K 7361/ JIS K 7136, GB/T 2410-08
Carbon Black Content Analyzer
High Precision Carbon Black Content Analyzer For Polybutene Plastics This instrument is suitable for the determination of carbon black content in polyethylene, polypropylene, and polybutene plastics. The test of carbon black is obtained by the gravimetric analysis of the sample under the protection of nitrogen after high temperature decomposition. The instrument has the advantages of convenient use, simple operation, reliable work, accurate measurement and automatic temperature control. The content of carbon black is an important technical indicator in the performance of the product. The content has a certain effect on the hardness, elasticity, wear resistance and insulation of the material.
Adhesive peeling testing machine
- Adhesive peeling testing machineÂ
- Force range: 30N, 50N,100N,200N
- Test speed:50, 100, 150, 200, 250, 300, 500 mm/min
