Plastic Packaging Bag Negative pressure Leak Tester
- Plastic Packaging Bag Sealing Tester
- Vacuum Degree 0- 90kPa
- Gas Supply Pressure 0.5MPa～0.7MPa
- Description
- Inquiry
Introduction
The tester is applicable in testing the seal of soft packaging in food and pharmaceutical industry. It can test the seal capability of soft packaging accurately, which provides scientific data for relative technical requirement. It also can test the specimen which has done the drop and compression test. The product is designed and manufactured according to GB/T15171-94 (the Seal Testing Method for soft packaging).
Technical specifications
| Vacuum Degree | 0- 90kPa |
| Vacuum Accuracy | 1FS |
| Gas Supply Pressure | 0.5MPa～0.7MPa |
| Vacuum hole time | 0-60min |
| Vacuum room size
| Φ270 mm x 210 mm (H) (Standard) Φ360 mm x 585 mm (H) (Optional) Φ460 mm x 330 mm (H) (Optional) |
| Overall tester size | 430mm x 330mm x 170mm (L x W x H) |
| N.W. | 9KG |
| Air Pressure | 0.5-0.9KPa |
| Temperature | 15℃-50℃ |
| Relative Humidity | No more than 80%, no dewdrop |
| Power Supply | 1-phase, 220V, 50Hz |
Related Products
High Temperature Creep Rupture Testing Machine
- High Temperature Creep Rupture Testing Machine
- Load Capacity:30kN
- Temperature Range:200-1200℃
- Testing Material；metals and composites
ISO 11358 Multi Function Thermal Analyzer DT Analyzer TG Analyzer DSC
High Precision Carbon Black Content Analyzer For Polybutene Plastics This instrument is suitable for the determination of carbon black content in polyethylene, polypropylene, and polybutene plastics. The test of carbon black is obtained by the gravimetric analysis of the sample under the protection of nitrogen after high temperature decomposition. The instrument has the advantages of convenient use, simple operation, reliable work, accurate measurement and automatic temperature control. The content of carbon black is an important technical indicator in the performance of the product. The content has a certain effect on the hardness, elasticity, wear resistance and insulation of the material.
ISO1409,ISO6295 Liquid Surface Tension Meter
The automatic tension meter is a simple and feasible test instrument which replaces the chemical method with the physical method. It can quickly and accurately measure the surface and interfacial tension of various liquids ,and the results can be displayed automatically.
Testing Standard:ISO1409,ISO6295
ASTM D2732 Plastic Film Heat Shrinkage Tester
This instrument is professionally applicable to the determination of heat shrinking performance and dimensional stability of various films, heatshrinkable tubes, hard PVC films for tablets, and back-sheets in the fluid medium at different temperatures.
Testing Standard:ASTM D2732
Dial Charpy Impact Tester
- Test Standard:ISO179
- Impact energy:7.5J, 15J, 25J, 50J
- Dial Charpy Impact Tester
ASTM D1003 Economic Haze Meter
It is designed for plastic sheets, films, glasses, LCD panel, touch screen and other transparent and semi-transparent materials haze and transmittance measurement.
Standards: ASTM D1003/D1044,ISO13468/ISO14782, JIS K 7361/ JIS K 7136, GB/T 2410-08
ISO 179 ASTM d256 Electric Izod Impact Specimen Notch Sample Making Machine
Electric Izod Impact Specimen Notch Sample-making Machine is the sampling machine producing notch sample used by charpy and izod impact tester to do the test of impact toughness of non- metallic materials
ISO 180 ISO 179 ASTM D256 Full Automatic Sample V Notch Cutting Cutter Machine
The plastic electric notch broaching machine is a sample preparation device for the notched sample used in the impact toughness test of the non-metallic material by the cantilever beam and the simply supported beam type impact tester.
Plastic Pipe Hydrostatic and Burst Testing Machine
- Maximum. Capacity: 6MPa, 10MPa, 16MPa, 25MPa;
- Plastic Pipe Hydrostatic Pressure Testing Machine
- Constant Temp. Range: Room Temp.~95℃ or 20℃~95℃
- Grips: Diameter of pipe:ф16- ф630mm
JIS K7124,ASTM D1709 Digital type Free Fall Darts Impact Tester
Fall darts impact tester apply to plastic film or chip which thickness less than 1mm impact by fall darts in a given great freedom to fall, test the impact quality and energy were when 50% plastic film or chip was damaged.
Testing Standard:JIS K7124,ASTM D1709
