High Temperature Creep Rupture Testing Machine
- High Temperature Creep Rupture Testing Machine
- Load Capacity:30kN
- Temperature Range:200-1200℃
- Testing Materialï¼›metals and composites
- Description
- Inquiry
Application
Creep and Rupture strength testing machines are essential to evaluate the time-dependent behavior of metals and composites at elevated temperatures under applied stress. (Creep-rupture, stress-rupture, stress-relaxation) is conducted to determine the deformation (creep) of a material when subjected to a prolonged load at a constant temperature.
Technical Parameters
Specification | CRT-30 |
Max. Load | 30kn |
Test range | 0.4~100 %FS |
Relative error of indicated value | ±0.5 |
Resolution of deformation | 1/300000 |
Speed range | 0.001~100 mm/min |
Speed rate control accuracy | ±0.5% |
Max loading speed rate | 3000N/s |
Constant test speed rate control error | ±0.5% |
Displacement range | 150mm |
Resolution | 0.000025 |
Temperature range | 200-1200℃ |
Related Products
 JIS K7124,ASTM D1709 Digital type Free Fall Darts Impact Tester
Fall darts impact tester apply to plastic film or chip which thickness less than 1mm impact by fall darts in a given great freedom to fall, test the impact quality and energy were when 50% plastic film or chip was damaged.
Testing Standard:JIS K7124,ASTM D1709
Insulator Tension and Flexure-Torsion Testing Machine
WDW Double Column Computerized Electronic Universal Testing Machine
- Load Capacity: 10nK ,20kN，50nK
- Testing Material:Â rubber, plastic, cable, wire, steel, aluminum, copper, geo-textile, Â thread, wood, alloy, PVC, spring, composite, profiled bar, waterproof roll, etc materials
- Testing Standard :GB, ISO, JIS, DIN and ASTMÂ
Plastic Packaging Bag Negative pressure Leak Tester
- Plastic Packaging Bag Sealing TesterÂ
- Vacuum Degree   0- 90kPa
- Gas Supply Pressure       0.5MPa～0.7MPa
WDW Computerized Electromechanical Universal Testing Machine
- Testing Standard:GB, ISO, JIS, DIN and ASTM, etc.
- Â Testing material:Testing material:paper, rubber, plastic, cable wire, filament, thin films, adhesives, foam, packaging, composite material, plastic profile, spring
- Testing Type:Tensile，compression, bending, peeling and tearing, etc test
ASTM F2029 Plastic Packaging Film Heat Seal Tester
The Heat Tester requests and takes heat-press seal method to test heat-seal temperature, time and pressure of plastic film material, soft packaging laminated film and other laminated film.
Testing Standard:ASTM F2029Â
HDT & VICAT Testing Machine
- HDT & VICAT Testing Machine
- Temperature range: room temperature~300°C
- Max temperature error: ±1°C
- Heating media: polydimethylsiloxane
Melt Flow Index Tester
- Melt Flow Index Tester
- Measuring range: 0. 01-600.00 g/10min (MFR)Â 0. 01-600.00 cm/10min (MVR)
                0.001-9.999 g/cm (melt density) - Piston diameter 9.457±0.01mm mass:106g
Rubber Plastics Horizontal Test Bed
- Rubber Plastics Horizontal Test Bed
- Load Capacity: 100N,200N,500N
- Test Material:paper, plastic industry, rubber, wire, textiles, latex industry, packaging industry, shoes, hardware industry and the cable industry
WDW-50S Computerized Ring Stiffness Testing Machine
- Load Capacity :50 kN
- Testing Material：ring stiffness, ring softness and it’s inner deformation of plastic pipe
- Testing Standard： ISO9969, ISO5893, ASTM D638, ASTM D790, ISO37, ASTM E4, ISO6892, ISO75000-1, EN 10002-4Â
- Computerized Ring Stiffness Testing MachineÂ
