ASTM F2029 Plastic Packaging Film Heat Seal Tester
The Heat Tester requests and takes heat-press seal method to test heat-seal temperature, time and pressure of plastic film material, soft packaging laminated film and other laminated film.
Testing Standard:ASTM F2029Â
- Description
- Inquiry
Introduction:
Heal seal capacity is one of most important performance in plastic package. The Heat Tester requests and takes heat-press seal method to test heat-seal temperature, time and pressure of plastic film material, soft packaging laminated film and other laminated film.
Feature:
Digital P.I.D. temperature control technology ensures the preset temperature to be reached rapidly without any fluctuation
Wide range control of temperature, pressure and time that meet various test conditions
Manual or pedal switch, as well as anti-scald design provides convenient and safe operating environment
Dual underneath and closed loop-type of gas cylinders ensure even pressure.
The aluminum heat sealing jaws ensure uniform heat spreading along the sealing surface.
Independent temperature control of the upper and lower jaws
Parameter:
| Seal Temperature | Room temperature-300℃ (resolution: +/-0.1C) |
| Dwell Time | 0.01s-99.99s |
| Dwell Pressure | 0.05MPa-0.7MPa |
| Heating Mode | Single heating surface and double heating surface |
| Seal Surface | 300 mm x 10 mm (customization available) |
| Dimension | 550mm(L) x 360mm(B) x 460mm(H) |
| Net Weight | 25kg |
| Power | ACÂ 110V/220V 50/60Hz |
Related Products
 JIS K7124,ASTM D1709 Digital type Free Fall Darts Impact Tester
Fall darts impact tester apply to plastic film or chip which thickness less than 1mm impact by fall darts in a given great freedom to fall, test the impact quality and energy were when 50% plastic film or chip was damaged.
Testing Standard:JIS K7124,ASTM D1709
Dial Charpy Impact Tester
- Test Standard:ISO179
- Impact energy:7.5J, 15J, 25J, 50J
- Dial Charpy Impact Tester
ASTM D1894, ISO8295 PET Films Coefficient of Friction Tester
Films Coefficient of Friction Tester it is designed according to the standard TAPPI – T 549 / ASTM D1894, ISO8295.It is mainly applying in testing the static and kinetic friction coefficient of plastic film and sheet,paper, pp woven bags, etc
ISO 179 ASTM d256 Electric Izod Impact Specimen Notch Sample Making Machine
Electric Izod Impact Specimen Notch Sample-making Machine  is the sampling machine producing notch sample used by charpy and izod impact tester to do the test of impact toughness of non- metallic materials
Plastic Packaging Bag Negative pressure Leak Tester
- Plastic Packaging Bag Sealing TesterÂ
- Vacuum Degree   0- 90kPa
- Gas Supply Pressure       0.5MPa～0.7MPa
WDW-50S Computerized Ring Stiffness Testing Machine
- Load Capacity :50 kN
- Testing Material：ring stiffness, ring softness and it’s inner deformation of plastic pipe
- Testing Standard： ISO9969, ISO5893, ASTM D638, ASTM D790, ISO37, ASTM E4, ISO6892, ISO75000-1, EN 10002-4Â
- Computerized Ring Stiffness Testing MachineÂ
HDT & VICAT Testing Machine
- HDT & VICAT Testing Machine
- Temperature range: room temperature~300°C
- Max temperature error: ±1°C
- Heating media: polydimethylsiloxane
XJC Series Izod and Charpy Impact Tester
-  Energy: Charpy 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
                 Izod 1J, 2.75J, 5.5J, 11J, 22J
Impact Speed: Charpy 2.9m/s 3.8m/s, Izod 3.5m/s
Support: Charpy 40mm  60mm  70mm 95mm
Izod 22mm  - XJC Series Izod and Charpy Impact Tester
-  Energy: Charpy 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
Carbon Black Content Analyzer
High Precision Carbon Black Content Analyzer For Polybutene Plastics This instrument is suitable for the determination of carbon black content in polyethylene, polypropylene, and polybutene plastics. The test of carbon black is obtained by the gravimetric analysis of the sample under the protection of nitrogen after high temperature decomposition. The instrument has the advantages of convenient use, simple operation, reliable work, accurate measurement and automatic temperature control. The content of carbon black is an important technical indicator in the performance of the product. The content has a certain effect on the hardness, elasticity, wear resistance and insulation of the material.
ASTM D1003 Economic Haze Meter
It is designed for plastic sheets, films, glasses, LCD panel, touch screen and other transparent and semi-transparent materials haze and transmittance measurement.
Standards: ASTM D1003/D1044,ISO13468/ISO14782, JIS K 7361/ JIS K 7136, GB/T 2410-08
