Si-Pin XRF Gold tester for Metal Element Analysis(70 kinds elements Analysis)
- High cost performance
Can fast accurate detection of various precious metal, widely applied! - Nondestructive testing
Will not cause any damage to measured sample jewelry and so on. - Operation is simple and smart
Automated testing without a unique key testing capabilities, with professional personnel - Fast for Testing
Qualitative 3 seconds, 7 seconds can be intuitive results. - Easy to Bring
The integration of design, small footprint, easy to carry and management. - Safe and durable
Have anti-radiation function, the machine more than 10 years of life - High precision
PPM level accuracy, reliable testing data, plus or minus 0.01% of the detection precision - The operational safety
Equipped with radiation protection devices, and active protection operation safety.
- Description
- Inquiry
Introduction:Â
Precious metal detector equipped with imported top SDD,SI PIN detector, the use of aircraft design, high-end atmosphere, with research and development of more than a dozen patents, outstanding performance, in line with the new national standard GB18043-2013, can be accurate detection of gold and silver jewelry and most of other metal elements and arduous substances.
Product advantage:
- High cost performance
Can fast accurate detection of various precious metal, widely applied! - Nondestructive testing
Will not cause any damage to measured sample jewelry and so on. - Operation is simple and smart
Automated testing without a unique key testing capabilities, with professional personnel - Fast for Testing
Qualitative 3 seconds, 7 seconds can be intuitive results. - Easy to Bring
The integration of design, small footprint, easy to carry and management. - Safe and durable
Have anti-radiation function, the machine more than 10 years of life - High precision
PPM level accuracy, reliable testing data, plus or minus 0.01% of the detection precision - The operational safety
Equipped with radiation protection devices, and active protection operation safety.
Standard configuration:
- Active radiation protection
- Global fault diagnosis
- Expansion wire and auxiliary support
- High voltage and over voltage protection
- Lifting pressure start
- Light tube of protection
- Expanded screen
Parameter:
| Name: | Xrf Metal Heavy Element Spectrum | |||
| Testable elements: | Â Ag, Au,Fe, Co, Ni, Cu, Zn, Se, Pd, Rh, Ru, Pt, Ir, Pb and etc(70 elements) | |||
| Equipment principles: | X fluorescence energy dispersion | Â Â Â Â Â Â Â Â | Test area: | 1-2mm spot +<40micron |
| Built-in capacitive touch LED: | OLED (7.9 inches) | Main structure: | High strength metal bracket + aluminum alloy shell | |
| Accuracy: | ±0.03% | Voltage: | 100-240v | |
| Detector: | Si-Pin (Import) | Power: |  150w | |
| Resolution: | 130±5 eV | Operating systerm: | Window 7 | |
| Work enviroment: | – 11 ~ 46 °C | Advantages: | excellent cooling system | |
| Â Battery support:: | no | Intelligence: | automatic protection | |
| Label/normal/thermal printer: | support | weight: | About 33kg | |
| Built-in computer: | yes | size: | 670×400×300mm | |
Related Products
ASTM D4061 Traffic Road Retro Reflectometer
Digital Traffic Road Retro Reflectometer for Marking Line and Vertical Sign is a professional measuring instrument used to measure the reflectivity of road markings. The measured parameters are the retroreflective coefficient R’or the specific brightness of the marking line in mcd. lx-1. m-2. The instrument is simple to operate and reliable in measurement. It can be used not only in laboratory environment, but also in field measurement. It is an optimum instrument for measuring the reverse reflection performance of pavement markings, such as production, quality supervision, engineering construction and supervision units.
Asphalt Bitumen Non-nuclear Electronic Density Gauge (EDG)
The EDG-2A non-nuclear asphalt density tester can quickly detect areas where road surface segregation, low density, and unevenness occur. The use of electromagnetic induction technology instead of nuclear source radiation method, low cost, high security, users do not have to worry about cumbersome environmental assessment applications, time-consuming training, and strict transportation control. The calibration is simple, the precision is high, the repeatability is good, the touch screen operation, the user can complete the relevant operation training in a short time, and master the technology of on-site quality inspection.
Portable O3 Ozone Leakage Tester
Feature
1. Using imported high-precision sensor, can simultaneously detect two, three or four gas
2. LCD dot matrix display technology
3. English operation interface
4. Gas concentration measurement units PPM, mg/m3 can quickly switch
5. Built-in micro sampling pump
6. Explosion-proof grade: Exia II CT4
Â
Paint Coating and Various Plates Pull Off Bond Strength Tester
Paint Coating and Various Plates Pull Off Bond Strength Testing Instrument is used to test the bonding strength of decorative bricks, tiles, mosaics, various plates, paints, coatings, exterior wall insulation materials (EPS panels, SPS panels) and also be used to test the bonding strength of various exterior wall building materials and adhesives.
Concrete Steel Bar Rebar Location and Corrosion Detector
Concrete Steel Bar Rebar Location and Corrosion Detector Integrate the functions of rebar position test , concrete thickness test, rebar diameter test and rebar corrosion degree test into one product.
Multifunction Pull Off Bond Strength Tester
40 kN Multifunction Pull Off Bond Strength Tester For Concrete Testing It is mainly used to detect the strength of concrete after installation and pull out, and to inspect the bonding strength of concrete facing bricks, mosaics, and wall or ground and the strength of concrete, chemical anchor drawing test.
This instrument is a small hydraulic force-measuring device. When testing the adhesive strength of decorative bricks, the three-point counterforce support is used to generate tensile force on the adhesive material of decorative bricks. The concrete is tested by using the principle of post-installation and extraction. The force required to anchor the concrete in the concrete is used to calculate the strength of the concrete.
The instrument consists of a through-hearth jack, a hand pump, a triangular chassis, and a force measuring device. It has the characteristics of one machine and two uses, a novel structure, small size, convenient operation and complete functions.Soil Electric Density Gauge(EDG) With GPS
High Precision Non nuclear Soil Electric Density Gauge(EDG) With GPSÂ that measures the physical properties of the roadbed and foundation compaction soils. It is a battery-driven portable instrument that can be used anywhere in the world without causing nuclear safety and other related issues. Measure and display dry / wet density, moisture content, and compaction percentage. Easy to use, can be used as a building auxiliary equipment to monitor the daily compaction operation, its high quality work performance and accurate measurement results can be with the traditional measurement methods, such as nuclear density measurement method, sand filling method, and drying method comparable.
Measure the physical properties of compacted materials, including density, moisture content, and percent compaction. Including: roadbed and foundation, embankment and filling, underground and basement, backfill and ditches, garbage and so on.
Multifunction Ultrasonic Concrete Crack Width and Depth Gauge
Coating Adhesion Bonding Strength Tester
Coating Adhesion Bonding Strength Tester is a new type of instrument, which is mainly used in the detection of coating adhesion in the construction of high-speed rail projects. It is a necessary testing instrument for quality inspection and construction units.
Portable Ultrasonic Flaw Detector
Ultrasonic Flaw Detector This is a portable industrial non-destructive flaw detector, which can rapidly, easily and accurately inspect, locate, evaluate and diagnose various defects (crack, inclusion and pinhole, etc.) in a workpiece without destruction
