Button Pull Snap Tester
Button Pull Snap Tester
Testing Standards:ASTM PS79-96, ASTM F963, EN 71-1, 16 CFR 1500.51-53, M&S P115A
- Description
- Inquiry
Introduction:
Snap Button Tester is used to determine the holding or breaking strength of prong ring attached snap fasteners onto garments, prevent the buttons divorce from the clothing,which case the dangerous if babyswallowing the buttons. So that every button and fixed parts on the clothing are required the detectionof the button pull test.
Specifications:
1.Imada mechanical force gauge
2.Upper Universal Grip for female part of snap
3.Upper Stud Clamp for male part of snap
4.Lower Fabric Clamp
5.Upper three pronged grip
6.Long Nose Vise Grip
7.Mechanical Stand for Imada Pull Gauge
8.Upper Three Pronged Grip
9.Upper Grasp Button Grip
10.Goggles
 Parameters:
 Load capacity |  500N |
 Load gauge Accuracy |  ±0.1% of full scale |
 Readability |  1N |
 Diameter of Pressing ring |  15mm 35mm |
 Instrument Dimension |  920*370*370mm |
 Weight |  38kg |
 Standard |  ASTM PS79-96,ASTM F963 etc |