Cement Concrete Pipe Internal Pressure Testing Machine
Concrete Pipe Internal Pressure Testing Machine Used for internal pressure test of concrete and reinforced concrete drain pipes.
- Description
- Inquiry
Concrete Pipe Internal Pressure Testing Machine Used for internal pressure test of concrete and reinforced concrete drain pipes.
Parameters:
| Pressure display | pressure gauge |
| Max. pressure | 0.16MPa |
| precision | 0.005MPa |
| Add water way | pumper |
| Drain line Size | ≤ diameter 2000mm |
| Dimension | 350x300x350cm |
| Total Weight Approx | 2900KG |
| Power | 380V, 1.5KW |
Related Products
Soil Electric Density Gauge(EDG) With GPS
High Precision Non nuclear Soil Electric Density Gauge(EDG) With GPSÂ that measures the physical properties of the roadbed and foundation compaction soils. It is a battery-driven portable instrument that can be used anywhere in the world without causing nuclear safety and other related issues. Measure and display dry / wet density, moisture content, and compaction percentage. Easy to use, can be used as a building auxiliary equipment to monitor the daily compaction operation, its high quality work performance and accurate measurement results can be with the traditional measurement methods, such as nuclear density measurement method, sand filling method, and drying method comparable.
Measure the physical properties of compacted materials, including density, moisture content, and percent compaction. Including: roadbed and foundation, embankment and filling, underground and basement, backfill and ditches, garbage and so on.
Multifunction Pull Off Bond Strength Tester
40 kN Multifunction Pull Off Bond Strength Tester For Concrete Testing It is mainly used to detect the strength of concrete after installation and pull out, and to inspect the bonding strength of concrete facing bricks, mosaics, and wall or ground and the strength of concrete, chemical anchor drawing test.
This instrument is a small hydraulic force-measuring device. When testing the adhesive strength of decorative bricks, the three-point counterforce support is used to generate tensile force on the adhesive material of decorative bricks. The concrete is tested by using the principle of post-installation and extraction. The force required to anchor the concrete in the concrete is used to calculate the strength of the concrete.
The instrument consists of a through-hearth jack, a hand pump, a triangular chassis, and a force measuring device. It has the characteristics of one machine and two uses, a novel structure, small size, convenient operation and complete functions.Marshall Asphalt Impact Compactor
Automatic Electric Marshall Asphalt Compaction Apparatus/ Marshall Asphalt Impact Compactor is a special equipment for specimen forming in Marshall test of asphalt mixture.
The instrument panel is equipped with preset switch, digital display, start, stop and pause buttons. The compaction instrument can automatically compact according to the preset compaction times, and automatically cut off the control circuit and turn off the motor when the set value is reached.ASTM D4061 Traffic Road Retro Reflectometer
Digital Traffic Road Retro Reflectometer for Marking Line and Vertical Sign is a professional measuring instrument used to measure the reflectivity of road markings. The measured parameters are the retroreflective coefficient R’or the specific brightness of the marking line in mcd. lx-1. m-2. The instrument is simple to operate and reliable in measurement. It can be used not only in laboratory environment, but also in field measurement. It is an optimum instrument for measuring the reverse reflection performance of pavement markings, such as production, quality supervision, engineering construction and supervision units.
Concrete Rebar Scanner
Portable Integrated Concrete Rebar Scanner Concrete Locator Concrete Rebar Detector For Concrete Cover Meter are mainly used for detecting the internal reinforcement position, the protective layer thickness, reinforcement spacing and diameter of rebar.
Portable Concrete Steel Bar Corrosion Detector
Portable Concrete Steel Bar Corrosion Detector/ Rebar Corrosion Tester which tests rebar corrosion in the concrete structure. Using electrochemistry method, do the functions for corrosion detection, data analysis, storage and output etc. It is a detection instrument which is handed, measurement accurately and easy to use.
Coating Adhesion Bonding Strength Tester
Coating Adhesion Bonding Strength Tester is a new type of instrument, which is mainly used in the detection of coating adhesion in the construction of high-speed rail projects. It is a necessary testing instrument for quality inspection and construction units.
Pocket Rebar Detector Steel Bar Detector Scanner
LCD display Handheld Pocket Rebar Detector Steel Bar Detector Scanneruses an electromagnetic induction method, which can detect the rebar location and cover thickness & diameter accurately, store, transfer and analyze the real time test data. The model is the pinnacle of work with the modern simple design, incorporating the handy & durable features and sophisticated electronic technology.
Rebar detector is mainly used to test the location, distribution, direction, the thickness of rebar and the diameter of cover in concrete structure such as walls,columns, beam-slabs etc. It can also detect the location of pipelines and metal embedded parts. The multiple coil structure design make it more accurate&responsive and higher resolution.
Penetration Mortar Concrete Compressive Strength Tester
Handle Penetration Mortar Concrete Compressive Strength Tester is suitable for masonry mortar strength testing and concrete strength testing. A new type of on-site detection method that uses the lever-type baster force method to penetrate the nail into the mortar and converts the compressive strength of the mortar through the penetration depth of the nail and the strength curve.
AC DC Magnetic Particle Yoke Flaw Detector
AC DC Magnetic Particle Yoke Flaw Detector has AC, DC, AC and DC dual-purpose magnetic particle flaw detector. The DC power supply is rechargeable battery, which is suitable for field operation without power supply and high-voltage inaccessible containers, bridges, pipelines and other field operations. The continuous working time of one charging can reach more than 6 hours. The AC power supply adopts ~ 220 V power supply for direct input without other instruments. It is easy to operate, simple, light weight and easy to carry.
