Lultcs and Veslic Abrasion Tester Comply ISO 11640
- Description
- Inquiry
Introduction：
Lultcs and Veslic Abrasion Tester test the degree of decolorization of dyeing leather after friction. It can used to test the leather color resistance to dry, wet and friction.
Feature:
Lultcs and Veslic Abrasion Tester is the working table driven by motor with specifiedÂ
speed and standard pressure to do reciprocating linear motion, the motor automatically stop if it arrives the specified number.
Standard:
ISO-11640, SATRA TM173, IUF 450, DIN 4843, EN ISO 20344 (7.3)
Parameter:
| Model | Lultcs and Veslic Abrasion Tester |
| Testing block size | 15 * 15mm (if need) |
| Auxiliary load | 500g, 1000 g |
| Testing table range | 37 mm ± 1mm |
| Speed of abrasive head |  40 ± 2/min |
| Maximum Speed of abrasive head |  setting 9999 * 1, 9999 * 10 times, 9999 * 100 times |
| Volume  | 30.5 * 43 * 47.5cm |
| Power | Â 20W |
| Power supply |  AC220V 50HZ |
| Outside dimension | 275mm * 245mm * 366mm |
| Weight | Â 21kg |
Related Products
DIN 4843 SHOE LACE & EYELETS ABRASION TESTER
shoe lace and eyelets abrasion tester   is used to determine the abrasion resistance of shoe laces
Related Testing Standard:DIN 4843，SATRA PM154
DIN 53516 ASTM D5963 ISO 4649 Sole DIN Abrasion Resistance Testing MachineÂ
Sole DIN Abrasion Resistance Testing Machine is applicable to flexible materials, rubber, tires, conveyor system, transmission belts, sole, leather and so on.Â
Related Testing Standard:DIN 53516 ASTM D5963 ISO 4649
BS EN 12959 BS 5131 Footwear stiffness tester
 Footwear stiffness tester   is used to test the longitudinal stiffness property of the shanks. Fix the back of the shank and loading on it front to produce a cantilever-type bending deformation and then measure the bending angle of shank, calculate the longitudinal stiffness.
Related Testing Standard:BS EN 12959 BS 5131
Leather Dyeing Machine For Lab Use With Muti-Drum
Leather dyeing machine is special designed for leather and fur color matching test, and satisfies the testing requirement of counterstain etc.
Footwear Adhesive Peel Strength Tester
Footwear adhesive peel strength tester applies to determine the peeling strength between upper and sole. A shoe with last is peeled by a knife; meanwhile the peeling strength is calculated base on the peeling force and knife edge width. Â
ISO 3379,17235 Footwear Lastometer
Footwear Lastometer  is used to determine distension and strength of leather grain. It is applicable to boot and shoe upper leather and light leather. It uses the clamping ring and cap to clamp round specimen and a steel ball to press against the centre of the flesh side of the specimen. The pressure and distension produced are recorded at grain crack and at burst (if bursting occurs).Â
Related Testing Standard:Â ISO 3379,17235
ASTM F489 ISO 20344 JAMES SLIP RESISTANCE TESTER
JAMES SLIP RESISTANCE TESTER is used to determine the dry static coefficient of friction of shoe and heel materials on controlled walking surfaces and under controlled conditions.
ISO 5402 Bally Flex Testing Machine
This product is to test the flexing-resistance of leathers for production of vamp, clothing materials, or bags
Related Testing Standard:ISO 5402
ISO 20344 Safety Footwear Compression Test Machine
Safety footwear compression test apparatus This machine is used to determine the safety footwear ability to resist the compression
Related Testing Standard:EN 344Â ISO 20344Â LD50
ISO 3880 Leather Shrinkage Temperature Tester
 Leather shrinkage temperature tester is used to determine the shrinkage temperature of leather heated at a specified rate in water.
Related Testing Standard :ISO 3880Â
