 Akron Vulcanized Rubber Abrasion Tester ISO4661 ISO1826
- Description
- Inquiry
Introduction
Akron Vulcanized Rubber Abrasion Tester Applied to test the wear ability of vulcanized rubber. It tests the abrasion consumption in certain testing range by the friction
under certain tilt angle and load. With digital setting and displaying the times of friction, automatically stop and integrate the host and controller.
Standard
ISO:4661-1:1993, ISO 2481:1988, ISO 471:1983, ISO 1826:1981
Parameter
The force on the rubber wheel :Â 26.7N (2.7Kgf)
The rotation speed of the rubber wheel shaft :76±2r/min
The rotation speed of the grinding wheel shaft :33-35r/min
The angle between the grinding wheel shaft and the grinding wheel shaft can be adjusted from 0° to 45°
The power supply voltage : AC220V±10%
Dimensions (length x width x height) 600mm x 480mm x 400mm
Net weight 60Kg
Related Products
WDW-50S Computerized Ring Stiffness Testing Machine
- Load Capacity :50 kN
- Testing Material：ring stiffness, ring softness and it’s inner deformation of plastic pipe
- Testing Standard： ISO9969, ISO5893, ASTM D638, ASTM D790, ISO37, ASTM E4, ISO6892, ISO75000-1, EN 10002-4Â
- Computerized Ring Stiffness Testing MachineÂ
Adhesive peeling testing machine
- Adhesive peeling testing machineÂ
- Force range: 30N, 50N,100N,200N
- Test speed:50, 100, 150, 200, 250, 300, 500 mm/min
ASTM D1003 Economic Haze Meter
It is designed for plastic sheets, films, glasses, LCD panel, touch screen and other transparent and semi-transparent materials haze and transmittance measurement.
Standards: ASTM D1003/D1044,ISO13468/ISO14782, JIS K 7361/ JIS K 7136, GB/T 2410-08
Digital Plastic bottle Cap Torque Tester
This tester is an intelligent multi-functional measuring instrument which is designed for testing various kinds of bottle lid torque. It main used in testing and calibrating tighten force, parts torsional destructive testing, etc.
Plastic Packaging Bag Negative pressure Leak Tester
- Plastic Packaging Bag Sealing TesterÂ
- Vacuum Degree   0- 90kPa
- Gas Supply Pressure       0.5MPa～0.7MPa
ASTM F2029 Plastic Packaging Film Heat Seal Tester
The Heat Tester requests and takes heat-press seal method to test heat-seal temperature, time and pressure of plastic film material, soft packaging laminated film and other laminated film.
Testing Standard:ASTM F2029Â
ISO 11358 Multi Function Thermal Analyzer DT Analyzer TG Analyzer DSC
High Precision Carbon Black Content Analyzer For Polybutene Plastics This instrument is suitable for the determination of carbon black content in polyethylene, polypropylene, and polybutene plastics. The test of carbon black is obtained by the gravimetric analysis of the sample under the protection of nitrogen after high temperature decomposition. The instrument has the advantages of convenient use, simple operation, reliable work, accurate measurement and automatic temperature control. The content of carbon black is an important technical indicator in the performance of the product. The content has a certain effect on the hardness, elasticity, wear resistance and insulation of the material.
ISO1409,ISO6295 Liquid Surface Tension Meter
The automatic tension meter is a simple and feasible test instrument which replaces the chemical method with the physical method. It can quickly and accurately measure the surface and interfacial tension of various liquids ,and the results can be displayed automatically.
Testing Standard:ISO1409,ISO6295Â
Dial Charpy Impact Tester
- Test Standard:ISO179
- Impact energy:7.5J, 15J, 25J, 50J
- Dial Charpy Impact Tester
ASTM D2732 Plastic Film Heat Shrinkage Tester
This instrument is professionally applicable to the determination of heat shrinking performance and dimensional stability of various films, heatshrinkable tubes, hard PVC films for tablets, and back-sheets in the fluid medium at different temperatures.
Testing Standard:ASTM D2732
