Leather Cracking Tester Digital Lastometer Comply ISO 3379
- Description
- Inquiry
Introduction:
Leather Cracking Tester Digital Lastometer聽 is聽tested聽the聽anti-cracking聽index聽in聽the聽thin聽leather聽and聽upper聽leather.聽First聽fixed聽specimen鈥檚聽
periphery聽by聽this聽device,聽and聽then聽make聽the聽ball聽rise聽up聽from聽the聽leather鈥檚聽inside聽by聽speed聽about聽
12mm聽per聽minute,聽When聽the聽leather聽suffered聽the聽strength聽of聽800N,聽the聽value聽of聽rising聽hight聽is聽the
聽measured聽value聽of聽crack.
Parameter聽
| Name | Leather Cracking Tester Digital Lastometer Comply ISO 3379聽 |
| Load聽Capacity | 1000聽N |
| Unit | kgf聽/聽N聽/聽LB |
| Resolution | 1聽/聽50000 |
| Inductive聽method | force聽sensor聽(from聽United聽States) |
| Diameter聽of聽the聽specimen聽after聽fixation | 桅25mm |
| Speed | 12聽mm聽/聽min |
| Ball聽Diameter | 桅6.25mm |
| Scale聽range | 0聽~聽20mm |
| Volume | (W聽脳聽D聽脳聽H):聽44聽脳聽33聽脳聽45聽cm |
| Power | 220V,聽50HZ |
Related Products
DIN 4843 SHOE LACE & EYELETS ABRASION TESTER
shoe lace and eyelets abrasion tester 聽聽is used to determine the abrasion resistance of shoe laces
Related Testing Standard:DIN 4843锛孲ATRA PM154
Footwear Adhesive Peel Strength Tester
Footwear adhesive peel strength tester聽applies to determine the peeling strength between upper and sole. A shoe with last is peeled by a knife; meanwhile the peeling strength is calculated base on the peeling force and knife edge width.聽聽
EN ISO 20344 Shoes Flexing Resistance Testing Machine
Whole Shoes Flexing Resistance Testing Machine聽is used to determine the resistance of materials to cut growth during repeated flexing. It is especially applicable to outsoles of footwear including sole constructions.
Related Testing Standard:聽EN ISO 20344
ASTM D813/D430 BS 903, BS ISO123 Leather Fatigue testing machine
Leather Fatigue testing machine 聽is used to determine the ability of soft rubbers, leathers, artificial leathers and EVA soles and other materials to resist dynamic fatigue.
Related Testing Standard:ASTM D813/D430 JIS-K6301 BS 903, BS ISO123 BS 903,聽 BS ISO123
ASTM F489 ISO 20344 JAMES SLIP RESISTANCE TESTER
JAMES SLIP RESISTANCE TESTER聽is used to聽determine the dry static coefficient of friction of shoe and heel materials on controlled walking surfaces and under controlled conditions.
EN ISO 20344 Shoe Socks Water Proofness Water Penetration Testing Machine
Shoes Water Penetration Test Apparatus 聽is used to test waterproof performance of rubber face and shoes lining of rubber shoes.
Related Testing Standard:EN ISO 20344
EN ISO 13287 SATRA TM144 Footwear Slip Resistance Tester
Footwear slip resistance tester is used to determine the slip resistance of conventionally soled safety, protective and occupational footwear on different floors (such as ceramic tile, stainless steel or carpet). It is not applicable to special purpose footwear containing spikes, metal studs or similar.
Related Testing Standard:EN ISO 13287, SATRA TM144
EN ISO 20344 Shoe Sole Flexing Resistance Tester
EN ISO 20344 Whole Shoe Sole Flexing Resistance Tester聽聽is used to determine the flexing angle of whole shoe under a specific load.聽 聽
Related Testing Standard:EN ISO 20344
DIN 53516 ASTM D5963 ISO 4649 Sole DIN Abrasion Resistance Testing Machine聽
Sole DIN Abrasion Resistance Testing Machine is applicable to flexible materials, rubber, tires, conveyor system, transmission belts, sole, leather and so on.聽
Related Testing Standard:DIN 53516 ASTM D5963 ISO 4649
ASTM D1052 ISO 5423 Rubber Shoes Sole Ross Flexing Tester
Shoes Sole Ross Flexing Tester聽聽is used for flexing test at a 90掳angle of rubber products, sole materials, PU, etc. by subjecting specifically prepared specimens to repeated bend flexing.聽The damage and cracking condition is then observed.
Related Testing Standard:ASTM D1052 ISO 5423
