EMC Testing Equipment 10 KV Surge Simulator
- Fully compliant with the latest standards of IEC61000-4-5
- Large LCD interface display, Chinese or English menu, easy to use
- LCD display, Intelligent control, Use the Programmable imported high-voltage power supply, Reliable performance
- Programmable operation by a key setting
- Built-in international standards level parameters and user models parameters, simple
- Built-in intelligent couping / decoupling network. Testing safety
- Impulse injected the phase angle asynchronous or 0-360 ° free to set
- The surge test Fully automatic switching without human operation
- Built-in the RS232 interface ,Remote operated by the optional control software.
EN 388 EN 1621 EN 13594 GLOVE IMPACT RESISTANCE TESTER
EN ISO 12945.1 Orbitor Pilling and Snagging Tester
Orbitor Pilling and Snagging Tester. To determine the surface fuzzes and pilling properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc.
Relative Testing Standard: EN ISO 12945-1 and BS 5811, etc.
EN ISO 13287 SATRA TM144 Footwear Slip Resistance Tester
Footwear slip resistance tester is used to determine the slip resistance of conventionally soled safety, protective and occupational footwear on different floors (such as ceramic tile, stainless steel or carpet). It is not applicable to special purpose footwear containing spikes, metal studs or similar.
Related Testing Standard:EN ISO 13287, SATRA TM144
EN ISO 20344 Shoe Socks Water Proofness Water Penetration Testing Machine
Shoes Water Penetration Test Apparatus is used to test waterproof performance of rubber face and shoes lining of rubber shoes.
Related Testing Standard:EN ISO 20344
EN ISO 20344 Shoe Sole Flexing Resistance Tester
EN ISO 20344 Whole Shoe Sole Flexing Resistance Tester is used to determine the flexing angle of whole shoe under a specific load.
Related Testing Standard:EN ISO 20344
EN ISO 20344 Shoes Flexing Resistance Testing Machine
Whole Shoes Flexing Resistance Testing Machine is used to determine the resistance of materials to cut growth during repeated flexing. It is especially applicable to outsoles of footwear including sole constructions.
Related Testing Standard: EN ISO 20344
EN/IEC61000-4-2 ISO10605 EMC ESD Simulator 20KV 30KV
Intelligent electrostatic discharge generator is designed specifically against electrostatic discharge immunity test requirements, and used to assess the electrical and electronic equipment to suffer from the operator and the surrounding objects electrostatic discharge interference, to provide a performance rating basis.
EN1149 Fabric Surface Resistance Tester
EN14683 Face Mask Air Exchange Pressure Difference Test Machine
Medical Face Masks Air Exchange Differential Pressure Tester is suitable for determining the air exchange differential pressure of medical face masks. It can also be used for the determination of other textile materials.
Related Testing Standard:EN14683
EN388 EN13997 Cut Resistance Tester
The cut resistance of a material is its ability to resist being cut through by a blade. This is measured in a machine in which a sharp blade is drawn across a specimen. The cuts are achieved in blade movements of 3 mm to 50 mm length when a range of forces are applied to the blade normal to the specimen surface.
EN412 EN1082-3 EN ISO 13998 GLOVE CUT AND PUNCTURE IMPACT CUTTING TESTER
- Home
- Products
- ELECTROMECHANICAL UNIVERSAL TESTING MACHINE
- HYDRAULIC UNIVERSAL TESTING MACHINE
- CIVIL ENGINEERING INSTRUMENT
- TEXTILE TESTING MACHINE
- DYNAMIC TESTING MACHINE
- HARDNESS TESTER
- IMPACT TESTING MACHINE
- NDT Instrument
- LEATHER AND FOOTWEAR TESTING MACHINE
- COMPRESSION TESTING MACHINE
- PLASTIC TESTING INSTRUMENT
- HORIZONTAL TESTING BED
- CUPPING TESTING MACHINE
- REBAR TENSILE AND BENDING TESTING MACHINE
- TORSION TESTING MACHINE
- TESTING MACHINE ACCESSORIES
- METALLURGICAL EQUIPMENT
- About Us
- News
- Contact Us
