Paint Coating and Various Plates Pull Off Bond Strength Tester
Paint Coating and Various Plates Pull Off Bond Strength Testing Instrument is used to test the bonding strength of decorative bricks, tiles, mosaics, various plates, paints, coatings, exterior wall insulation materials (EPS panels, SPS panels) and also be used to test the bonding strength of various exterior wall building materials and adhesives.
Paper Film Thickness Measuring Gauge
Laboratory High Precision Paper Film Thickness Measuring Instrument Gauge designed based on mechanical contacting method, which effectively ensures standard and accurate test data and is applicable to thickness test of plastic films, sheets, diaphragms, paper, foils, silicon wafers and other materials within specified range.
Paper Plastic Film Sheet Elmendorf Tearing Strength Tester Comply ISO 6383 ASTM D1424
Penetration Mortar Concrete Compressive Strength Tester
Handle Penetration Mortar Concrete Compressive Strength Tester is suitable for masonry mortar strength testing and concrete strength testing. A new type of on-site detection method that uses the lever-type baster force method to penetrate the nail into the mortar and converts the compressive strength of the mortar through the penetration depth of the nail and the strength curve.
PI TAPE PIPE OUTSIDE DIAMETER MEASURE TOOL MADE IN CHINA
Plastic Packaging Bag Negative pressure Leak Tester
- Plastic Packaging Bag Sealing Tester
- Vacuum Degree 0- 90kPa
- Gas Supply Pressure 0.5MPa～0.7MPa
Plastic Pipe Hydrostatic and Burst Testing Machine
- Maximum. Capacity: 6MPa, 10MPa, 16MPa, 25MPa;
- Plastic Pipe Hydrostatic Pressure Testing Machine
- Constant Temp. Range: Room Temp.~95℃ or 20℃~95℃
- Grips: Diameter of pipe:ф16- ф630mm
Plastic Rubber And Non Metal Vicat Softening Point Tester
ASTM D 1525 Plastic Rubber And Non Metal Material Heat Deformation Tester HDT / Vicat Softening Point Tester This machine is a non-metallic material testing instrument designed and manufactured according to the latest international standards and national standards. It is mainly used for non-metal such as plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting laminates. Determination of the heat distortion temperature of the material and the Vicat softening point temperature. It is easy to operate and precise in control. It is a highly intelligent test instrument widely used in colleges and universities, research institutes and product quality supervision and inspection units. It adopts single-chip control, PID phase-modulated output, with upper limit temperature setting, and automatically stops heating when the test temperature reaches the upper limit temperature.
Plastic Rubber Dumbbell Specimen Making Machine
Plastic Rubber Dumbbell Specimen Making Machine suitable for making standard samples of semi-rigid and hard plastic non-metallic materials into dumbbell shape and rectangle shape. The blank of the sample is directly clamped in the corresponding fixture and milled close to the rotating milling cutter.
PMCC Closed Cup Flash Point Tester For Petroleum Testing
PMCC Closed Cup Flash Point Tester For Petroleum Testing This instrument is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point – Pensky-Martens Closed Cup Method and ASTM D93 Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester. It is used to make determination of the closed cup flash point of the petroleum products.
Pneumatic Fabric Sample Press Machine
Pneumatic Fabric Sample Press Machine
ASTM D3776, ASTM D2646, BS 3424, BS 2471, BS EN12127, ISO 3801, M&S P65, M&S P65A
Pocket Rebar Detector Steel Bar Detector Scanner
LCD display Handheld Pocket Rebar Detector Steel Bar Detector Scanneruses an electromagnetic induction method, which can detect the rebar location and cover thickness & diameter accurately, store, transfer and analyze the real time test data. The model is the pinnacle of work with the modern simple design, incorporating the handy & durable features and sophisticated electronic technology.
Rebar detector is mainly used to test the location, distribution, direction, the thickness of rebar and the diameter of cover in concrete structure such as walls,columns, beam-slabs etc. It can also detect the location of pipelines and metal embedded parts. The multiple coil structure design make it more accurate&responsive and higher resolution.
- Home
- Products
- ELECTROMECHANICAL UNIVERSAL TESTING MACHINE
- HYDRAULIC UNIVERSAL TESTING MACHINE
- CIVIL ENGINEERING INSTRUMENT
- TEXTILE TESTING MACHINE
- DYNAMIC TESTING MACHINE
- HARDNESS TESTER
- IMPACT TESTING MACHINE
- NDT Instrument
- LEATHER AND FOOTWEAR TESTING MACHINE
- COMPRESSION TESTING MACHINE
- PLASTIC TESTING INSTRUMENT
- HORIZONTAL TESTING BED
- CUPPING TESTING MACHINE
- REBAR TENSILE AND BENDING TESTING MACHINE
- TORSION TESTING MACHINE
- TESTING MACHINE ACCESSORIES
- METALLURGICAL EQUIPMENT
- About Us
- News
- Contact Us
