ASTM D1693 Environmental Stress Cracking Tester
- Description
- Inquiry
Introduction:
ASTM D1693 Environmental Stress Cracking Tester聽 is used to determine the susceptibility of ethylene plastics to environmental stress-cracking when subjected to specified conditions and in the presence of environments such as soaps, wetting agents, oils, or detergents, ethylene plastic may exhibit mechanical failure by cracking.
Feature:
- It consists of constant-temperature bath, nicking jig, bending clamp, transfer tool, etc.
聽 聽 聽 2.The constant-temperature bath can be independent test equipment to be used for conditioning test specimens
Parameter :
| Temperature range | RT-95鈩 |
| Temperature accuracy | 卤0.5鈩 |
| Temperature fluctuation | 卤0.2鈩 |
| Temperature gradient | 卤0.5鈩 |
| Nicking depth | 0~1mm, adjustable |
Related Products
ASTM D1003 Light Transmit Haze meter
The meter is applicable in all transparent and semitransparent parallel level material for testing transmittance and haze degree. It is designed according to GB2410-80, ASTMD1003-61 (1977), JISK7105 and so on
ASTM D2732 Plastic Film Heat Shrinkage Tester
This instrument is professionally applicable to the determination of heat shrinking performance and dimensional stability of various films, heatshrinkable tubes, hard PVC films for tablets, and back-sheets in the fluid medium at different temperatures.
Testing Standard:ASTM D2732
Plastic Pipe Hydrostatic and Burst Testing Machine
- Maximum. Capacity: 6MPa, 10MPa, 16MPa, 25MPa;
- Plastic Pipe Hydrostatic Pressure Testing Machine
- Constant Temp. Range: Room Temp.~95鈩兟爋r 20鈩儈95鈩
- Grips: Diameter of pipe:褎16- 褎630mm
ISO 11358 Multi Function Thermal Analyzer DT Analyzer TG Analyzer DSC
High Precision Carbon Black Content Analyzer For Polybutene Plastics This instrument is suitable for the determination of carbon black content in polyethylene, polypropylene, and polybutene plastics. The test of carbon black is obtained by the gravimetric analysis of the sample under the protection of nitrogen after high temperature decomposition. The instrument has the advantages of convenient use, simple operation, reliable work, accurate measurement and automatic temperature control. The content of carbon black is an important technical indicator in the performance of the product. The content has a certain effect on the hardness, elasticity, wear resistance and insulation of the material.
Melt Flow Index Tester
- Melt Flow Index Tester
- Measuring range: 0. 01-600.00 g/10min (MFR)聽0. 01-600.00 cm/10min (MVR)
聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽0.001-9.999 g/cm (melt density) - Piston diameter 9.457卤0.01mm mass:106g
HDT & VICAT Testing Machine
- HDT & VICAT Testing Machine
- Temperature range: room temperature~300掳C
- Max temperature error: 卤1掳C
- Heating media: polydimethylsiloxane
ISO 180 ISO 179 ASTM D256 Full Automatic Sample V Notch Cutting Cutter Machine
The plastic electric notch broaching machine is a sample preparation device for the notched sample used in the impact toughness test of the non-metallic material by the cantilever beam and the simply supported beam type impact tester.
Digital Plastic bottle Cap Torque Tester
This tester聽is an intelligent multi-functional measuring instrument which is designed for testing various kinds of bottle lid torque. It main used in testing and calibrating tighten force, parts torsional destructive testing, etc.
WDW-50S Computerized Ring Stiffness Testing Machine
- Load Capacity :50 kN
- Testing Material锛歳ing stiffness, ring softness and it’s inner deformation of plastic pipe
- Testing Standard锛毬營SO9969,聽ISO5893, ASTM D638, ASTM D790, ISO37, ASTM E4,聽ISO6892, ISO75000-1, EN 10002-4聽
- Computerized Ring Stiffness Testing Machine聽
XJC Series Izod and Charpy Impact Tester
- 聽Energy: Charpy聽 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽 Izod聽 1J, 2.75J, 5.5J, 11J, 22J
Impact Speed: Charpy聽 2.9m/s聽 3.8m/s, Izod聽 3.5m/s
Support: Charpy聽 40mm聽聽 60mm聽聽 70mm聽 95mm
Izod聽 22mm聽聽 - XJC Series Izod and Charpy Impact Tester
- 聽Energy: Charpy聽 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
