IEC60332 Wire and Cable Vertical Flammability Tester
 IEC60332 Wire and Cable Vertical Flammability Tester is suitable for measuring the vertical burning non-spreading performance of single plastic wire, control wire, cross-linked, elevator, ship, mining cable, etc. It can also be used for vertical burning test of high self-extinguishing low-smoke halogen-free flame-retardant olefin irradiated insulating material.
- Description
- Inquiry
 Introduction
Standards
IEC60332-1-2:2004 Optical cable burning test
IEC60332-1-3:2004 Insulated wire dripping test
IEC60332-2-1:2004 Test of cables and optical cables under fire conditions
IEC60332-2-2:2004 Cable and optical cable test in fire environment
En50265-1 VDE low smoke halogen-free flame retardant test standard
IEC60695-11-2:2003 Fire Hazard Test – Part 12
Parameter:
Related Products
Digital Plastic bottle Cap Torque Tester
This tester is an intelligent multi-functional measuring instrument which is designed for testing various kinds of bottle lid torque. It main used in testing and calibrating tighten force, parts torsional destructive testing, etc.
 JIS K7124,ASTM D1709 Digital type Free Fall Darts Impact Tester
Fall darts impact tester apply to plastic film or chip which thickness less than 1mm impact by fall darts in a given great freedom to fall, test the impact quality and energy were when 50% plastic film or chip was damaged.
Testing Standard:JIS K7124,ASTM D1709
Melt Flow Index Tester
- Melt Flow Index Tester
- Measuring range: 0. 01-600.00 g/10min (MFR)Â 0. 01-600.00 cm/10min (MVR)
                0.001-9.999 g/cm (melt density) - Piston diameter 9.457±0.01mm mass:106g
Dial Charpy Impact Tester
- Test Standard:ISO179
- Impact energy:7.5J, 15J, 25J, 50J
- Dial Charpy Impact Tester
ASTM D1003 Economic Haze Meter
It is designed for plastic sheets, films, glasses, LCD panel, touch screen and other transparent and semi-transparent materials haze and transmittance measurement.
Standards: ASTM D1003/D1044,ISO13468/ISO14782, JIS K 7361/ JIS K 7136, GB/T 2410-08
HDT & VICAT Testing Machine
- HDT & VICAT Testing Machine
- Temperature range: room temperature~300°C
- Max temperature error: ±1°C
- Heating media: polydimethylsiloxane
Adhesive peeling testing machine
- Adhesive peeling testing machineÂ
- Force range: 30N, 50N,100N,200N
- Test speed:50, 100, 150, 200, 250, 300, 500 mm/min
Plastic Packaging Bag Negative pressure Leak Tester
- Plastic Packaging Bag Sealing TesterÂ
- Vacuum Degree   0- 90kPa
- Gas Supply Pressure       0.5MPa～0.7MPa
High Temperature Creep Rupture Testing Machine
- High Temperature Creep Rupture Testing Machine
- Load Capacity:30kN
- Temperature Range:200-1200℃
- Testing Materialï¼›metals and composites
ASTM F2029 Plastic Packaging Film Heat Seal Tester
The Heat Tester requests and takes heat-press seal method to test heat-seal temperature, time and pressure of plastic film material, soft packaging laminated film and other laminated film.
Testing Standard:ASTM F2029Â
