ISO 4599 ASTM D1693 Plastic Environmental Stress-Cracking Tester
- Description
- Inquiry
Introduction:
Plastic Environmental Stress-Cracking Tester聽 is used to determine the susceptibility of ethylene plastics to environmental stress-cracking when subjected to specified conditions and in the presence of environments such as soaps, wetting agents, oils, or detergents, ethylene plastic may exhibit mechanical failure by cracking.
Working Principle:
Bent specimens of the plastic, each having a controlled imperfection on the surface, are exposed to the action of a surface-active agent. The proportion of the total number of specimens that crack in a given time is observed.
Standard:
ASTM D1693聽
ISO 4599
Parameter:
| Temperature range | RT-95鈩 |
| Temperature accuracy | 卤0.5鈩 |
| Temperature fluctuation | 卤0.2鈩 |
| Temperature gradient | 卤0.5鈩 |
| Nicking depth | 0~1mm, adjustable |
Related Products
ASTM D1003 Economic Haze Meter
It is designed for plastic sheets, films, glasses, LCD panel, touch screen and other transparent and semi-transparent materials haze and transmittance measurement.
Standards: ASTM D1003/D1044,ISO13468/ISO14782,聽JIS K 7361/聽JIS K 7136,聽GB/T 2410-08
ASTM D1003 Light Transmit Haze meter
The meter is applicable in all transparent and semitransparent parallel level material for testing transmittance and haze degree. It is designed according to GB2410-80, ASTMD1003-61 (1977), JISK7105 and so on
WDW-50S Computerized Ring Stiffness Testing Machine
- Load Capacity :50 kN
- Testing Material锛歳ing stiffness, ring softness and it’s inner deformation of plastic pipe
- Testing Standard锛毬營SO9969,聽ISO5893, ASTM D638, ASTM D790, ISO37, ASTM E4,聽ISO6892, ISO75000-1, EN 10002-4聽
- Computerized Ring Stiffness Testing Machine聽
Plastic Pipe Hydrostatic and Burst Testing Machine
- Maximum. Capacity: 6MPa, 10MPa, 16MPa, 25MPa;
- Plastic Pipe Hydrostatic Pressure Testing Machine
- Constant Temp. Range: Room Temp.~95鈩兟爋r 20鈩儈95鈩
- Grips: Diameter of pipe:褎16- 褎630mm
ASTM D1894, ISO8295 PET Films Coefficient of Friction Tester
Films Coefficient of Friction Tester it is designed according to the standard TAPPI 鈥 T 549 / ASTM D1894, ISO8295.It is mainly applying in testing the static and kinetic friction coefficient of plastic film and sheet,paper, pp woven bags, etc
XJC Series Izod and Charpy Impact Tester
- 聽Energy: Charpy聽 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽 Izod聽 1J, 2.75J, 5.5J, 11J, 22J
Impact Speed: Charpy聽 2.9m/s聽 3.8m/s, Izod聽 3.5m/s
Support: Charpy聽 40mm聽聽 60mm聽聽 70mm聽 95mm
Izod聽 22mm聽聽 - XJC Series Izod and Charpy Impact Tester
- 聽Energy: Charpy聽 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
Melt Flow Index Tester
- Melt Flow Index Tester
- Measuring range: 0. 01-600.00 g/10min (MFR)聽0. 01-600.00 cm/10min (MVR)
聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽聽0.001-9.999 g/cm (melt density) - Piston diameter 9.457卤0.01mm mass:106g
Adhesive peeling testing machine
- Adhesive peeling testing machine聽
- Force range:聽30N,聽50N,100N,200N
- Test speed:50,聽100,聽150,聽200,聽250,聽300,聽500 mm/min
Dial Charpy Impact Tester
- Test Standard:ISO179
- Impact energy:7.5J, 15J, 25J, 50J
- Dial Charpy Impact Tester
HDT & VICAT Testing Machine
- HDT & VICAT Testing Machine
- Temperature range: room temperature~300掳C
- Max temperature error: 卤1掳C
- Heating media: polydimethylsiloxane
