Laboratory Plastic Injection Molding Machine
Plastic Lab Injection Molding Machine reduces and improves the production machine, which has little volume and strong removability, injection molding machine is suitable for classroom teaching and the making of the small simple. This injection molding machine contains opening mould and closing mould parts, melting plastic injection parts, machine body, heating system, control system, and charging device.
- Description
- Inquiry
Introduction:
Laboratory Plastic Injection Molding Machine reduces and improves the production machine, which has little volume and strong removability, injection molding machine is suitable for classroom teaching and the making of the small simple. This injection molding machine contains opening mould and closing mould parts, melting plastic injection parts, machine body, heating system, control system, and charging device.
Features:
1) Simple structure in linear type ,easy in installation and maintation.
2) Reduces and improves the production machine, which has little volume and strong removability.
3) Suitable for classroom teaching and the making of the small simple.
4) Has simple structure, easy operation, and has no noisy and no pollution.
5) Adopt 220V voltage, can be used in any place with electric, and will not restrict by industrial electricity.
Parameter :
| Feed Torque | 105N.M(Servo Motor + Planetary Reducer) |
| Air Pressure | ≥0.8Mpa |
| Displacement Travel | 0-80mm |
| Injection Volume Resolution | 0.1mm |
| Hopper Capacity | 0.2L |
| Speed Of Feeding | 0.1-60rpm |
| Open Mold Trip | 70mm |
| Injection Force | 1.8T |
| Maximum Ejection Force | 57Mpa |
| Maximum Amount Of Glue Shot | (About) 30g/25 Cubic Centimeter (Limpid Car Needs Custom Times The Force System |
| Clamping Force | 6T |
| Highest Temperature | 360 ° C |
| Temperature Control Accuracy | ± 0.5 ° C (Constant Temperature) |
| Power | Ac 220V 10%；50Hz；2200W；10A |
Related Products
Plastic Pipe Hydrostatic and Burst Testing Machine
- Maximum. Capacity: 6MPa, 10MPa, 16MPa, 25MPa;
- Plastic Pipe Hydrostatic Pressure Testing Machine
- Constant Temp. Range: Room Temp.~95℃ or 20℃~95℃
- Grips: Diameter of pipe:ф16- ф630mm
Adhesive peeling testing machine
- Adhesive peeling testing machine
- Force range: 30N, 50N,100N,200N
- Test speed:50, 100, 150, 200, 250, 300, 500 mm/min
ASTM D1894, ISO8295 PET Films Coefficient of Friction Tester
Films Coefficient of Friction Tester it is designed according to the standard TAPPI – T 549 / ASTM D1894, ISO8295.It is mainly applying in testing the static and kinetic friction coefficient of plastic film and sheet,paper, pp woven bags, etc
ISO 11358 Multi Function Thermal Analyzer DT Analyzer TG Analyzer DSC
High Precision Carbon Black Content Analyzer For Polybutene Plastics This instrument is suitable for the determination of carbon black content in polyethylene, polypropylene, and polybutene plastics. The test of carbon black is obtained by the gravimetric analysis of the sample under the protection of nitrogen after high temperature decomposition. The instrument has the advantages of convenient use, simple operation, reliable work, accurate measurement and automatic temperature control. The content of carbon black is an important technical indicator in the performance of the product. The content has a certain effect on the hardness, elasticity, wear resistance and insulation of the material.
ASTM D1003 Light Transmit Haze meter
The meter is applicable in all transparent and semitransparent parallel level material for testing transmittance and haze degree. It is designed according to GB2410-80, ASTMD1003-61 (1977), JISK7105 and so on
HDT & VICAT Testing Machine
- HDT & VICAT Testing Machine
- Temperature range: room temperature~300°C
- Max temperature error: ±1°C
- Heating media: polydimethylsiloxane
High Temperature Creep Rupture Testing Machine
- High Temperature Creep Rupture Testing Machine
- Load Capacity:30kN
- Temperature Range:200-1200℃
- Testing Material；metals and composites
WDW-50S Computerized Ring Stiffness Testing Machine
- Load Capacity :50 kN
- Testing Material：ring stiffness, ring softness and it’s inner deformation of plastic pipe
- Testing Standard： ISO9969, ISO5893, ASTM D638, ASTM D790, ISO37, ASTM E4, ISO6892, ISO75000-1, EN 10002-4
- Computerized Ring Stiffness Testing Machine
Melt Flow Index Tester
- Melt Flow Index Tester
- Measuring range: 0. 01-600.00 g/10min (MFR) 0. 01-600.00 cm/10min (MVR)
0.001-9.999 g/cm (melt density) - Piston diameter 9.457±0.01mm mass:106g
JIS K7124,ASTM D1709 Digital type Free Fall Darts Impact Tester
Fall darts impact tester apply to plastic film or chip which thickness less than 1mm impact by fall darts in a given great freedom to fall, test the impact quality and energy were when 50% plastic film or chip was damaged.
Testing Standard:JIS K7124,ASTM D1709
