Thermal Conductivity Meter Guarded Hot Plate Tester
-20~80C Thermal Conductivity Meter Guarded Hot Plate Tester has many advantages, such as large area of the test sample, variety test materials (single materials or composite materials), high precision temperature control, reliable and steady performance, high degree of automation control, convenient operation, etc.
- Description
- Inquiry
Introduction:
-20~80C Thermal Conductivity Meter Guarded Hot Plate Tester has many advantages, such as large area of the test sample, variety test materials (single materials or composite materials), high precision temperature control, reliable and steady performance, high degree of automation control, convenient operation, etc.
Application:
Single material:
foam (insulation material surface flat, plate), polyurethanes, phenolic, urea-formaldehyde, mineral wool (glass wool, rock wool, mineral wool), cement wall.
Composite materials:
glass composite CRC, cement enhanced polyphony board, sandwich concrete, fiber glass panel composite plate, paper cellular plate
Standards:
ISO8302: Thermal insulation. Determination of steady-state thermal resistance and related proper
Feature:
The surface temperature is uniformity and accurate.
Using large block purple COINS as Temperature profile board in the design to improve the consistency of the surface temperature of the test sample.
Advanced control system to control the temperature quickly and steadily.
Friendly human-machine interface.
Both cold and hot plate temperature and heat flux power can be intuitively displayed by large screen LCD.
Simple operation.
Electric moveable holder and clamping force can be adjusted on the LCD, Insulation door can be shut down automatically after sample installation.
Intelligent data processing.
Highly automated computer data communication and report processing system, Flat thermal conductivity meter has computer communication interface, which can display temperature curve in real time.
Automatically generate test report and print.
Built-in test records, data processing and report format, can issue test report automatically.
Technical parameters:
| Biggest test pieces size | Length * width * thick: 300 * 300 * 30mm |
| Sample size | 300mm * 300mm * δ (5-30) mm |
| Accuracy of temperature control | 0.05 ℃ |
| Resolution | 0.01 ℃ |
| Maximum hot plate set temperature | 80 ℃ |
| Minimum of cooling-plate set temperature | – 20 ℃ |
| Minimum cooling-plate set temperature | room temperature in a standard lab |
| Refrigerating by compressor, lowest -20℃ | |
| Accuracy of measurement | 3% |
Thermal conductivity Coefficient range | 0.010 ~ 5.000 w (k.m) |
| Power | AC 220V |
| Testing time | 40-60minutes |
Related Products
ASTM D2732 Plastic Film Heat Shrinkage Tester
This instrument is professionally applicable to the determination of heat shrinking performance and dimensional stability of various films, heatshrinkable tubes, hard PVC films for tablets, and back-sheets in the fluid medium at different temperatures.
Testing Standard:ASTM D2732
XJC Series Izod and Charpy Impact Tester
- Energy: Charpy 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
Izod 1J, 2.75J, 5.5J, 11J, 22J
Impact Speed: Charpy 2.9m/s 3.8m/s, Izod 3.5m/s
Support: Charpy 40mm 60mm 70mm 95mm
Izod 22mm - XJC Series Izod and Charpy Impact Tester
- Energy: Charpy 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
ISO 180 ISO 179 ASTM D256 Full Automatic Sample V Notch Cutting Cutter Machine
The plastic electric notch broaching machine is a sample preparation device for the notched sample used in the impact toughness test of the non-metallic material by the cantilever beam and the simply supported beam type impact tester.
JIS K7124,ASTM D1709 Digital type Free Fall Darts Impact Tester
Fall darts impact tester apply to plastic film or chip which thickness less than 1mm impact by fall darts in a given great freedom to fall, test the impact quality and energy were when 50% plastic film or chip was damaged.
Testing Standard:JIS K7124,ASTM D1709
Dial Charpy Impact Tester
- Test Standard:ISO179
- Impact energy:7.5J, 15J, 25J, 50J
- Dial Charpy Impact Tester
Plastic Pipe Hydrostatic and Burst Testing Machine
- Maximum. Capacity: 6MPa, 10MPa, 16MPa, 25MPa;
- Plastic Pipe Hydrostatic Pressure Testing Machine
- Constant Temp. Range: Room Temp.~95℃ or 20℃~95℃
- Grips: Diameter of pipe:ф16- ф630mm
Melt Flow Index Tester
- Melt Flow Index Tester
- Measuring range: 0. 01-600.00 g/10min (MFR) 0. 01-600.00 cm/10min (MVR)
0.001-9.999 g/cm (melt density) - Piston diameter 9.457±0.01mm mass:106g
Adhesive peeling testing machine
- Adhesive peeling testing machine
- Force range: 30N, 50N,100N,200N
- Test speed:50, 100, 150, 200, 250, 300, 500 mm/min
ISO1409,ISO6295 Liquid Surface Tension Meter
The automatic tension meter is a simple and feasible test instrument which replaces the chemical method with the physical method. It can quickly and accurately measure the surface and interfacial tension of various liquids ,and the results can be displayed automatically.
Testing Standard:ISO1409,ISO6295
ISO 11358 Multi Function Thermal Analyzer DT Analyzer TG Analyzer DSC
High Precision Carbon Black Content Analyzer For Polybutene Plastics This instrument is suitable for the determination of carbon black content in polyethylene, polypropylene, and polybutene plastics. The test of carbon black is obtained by the gravimetric analysis of the sample under the protection of nitrogen after high temperature decomposition. The instrument has the advantages of convenient use, simple operation, reliable work, accurate measurement and automatic temperature control. The content of carbon black is an important technical indicator in the performance of the product. The content has a certain effect on the hardness, elasticity, wear resistance and insulation of the material.
