EN ISO 20344 Shoe Sole Flexing Resistance Tester
EN ISO 20344 Whole Shoe Sole Flexing Resistance Tester is used to determine the flexing angle of whole shoe under a specific load.
Related Testing Standard:EN ISO 20344
EN ISO 20344 Shoes Flexing Resistance Testing Machine
Whole Shoes Flexing Resistance Testing Machine is used to determine the resistance of materials to cut growth during repeated flexing. It is especially applicable to outsoles of footwear including sole constructions.
Related Testing Standard: EN ISO 20344
Footwear Adhesive Peel Strength Tester
Footwear adhesive peel strength tester applies to determine the peeling strength between upper and sole. A shoe with last is peeled by a knife; meanwhile the peeling strength is calculated base on the peeling force and knife edge width.
ISO 17700 BS1006/BS5131 SATRA TM8/TM14 Upper Linings Friction Color Fastness Tester
Fabric friction color fastness tester is used to determine the color fastness of upper, linings, insocks, leather and fabric to rubbing.
Related Testing Standard:ISO 17700 BS1006/BS5131 SATRA TM8/TM14
ISO 20344 5.12 Shoes Sole Thermal Heat Insulation Resistance Tester
Heat Insulation Resistance Tester is used to determine the resistance of the shoe material to heat.
Related Testing Standard:ISO 20344 5.12
ISO 20344 Safety Footwear Compression Test Machine
Safety footwear compression test apparatus This machine is used to determine the safety footwear ability to resist the compression
Related Testing Standard:EN 344 ISO 20344 LD50
ISO 20344 Safety footwear impact testing machine
Safety footwear impact testing machine This machine research and development is based on EN, ANSI, BS, CSA standard. Apply 100J or 200J of kinetic energy to safety footwear and then examine their deformation in order to understand the quality and safety.
Related Testing Standard: ISO 20344
ISO 3379,17235 Footwear Lastometer
Footwear Lastometer is used to determine distension and strength of leather grain. It is applicable to boot and shoe upper leather and light leather. It uses the clamping ring and cap to clamp round specimen and a steel ball to press against the centre of the flesh side of the specimen. The pressure and distension produced are recorded at grain crack and at burst (if bursting occurs).
Related Testing Standard: ISO 3379,17235
ISO 3880 Leather Shrinkage Temperature Tester
Leather shrinkage temperature tester is used to determine the shrinkage temperature of leather heated at a specified rate in water.
Related Testing Standard :ISO 3880
ISO 5402 Bally Flex Testing Machine
This product is to test the flexing-resistance of leathers for production of vamp, clothing materials, or bags
Related Testing Standard:ISO 5402
ISO 9227 Salt Spray fog Corrosion Test Chamber
Salt Spray Corrosion Testing Equipment, Salt Fog Chamber is a standardized and popular corrosion test method, used to check corrosion resistance of materials and surface coatings.
Usually, the materials to be tested are metallic and finished with a surface coating which is intended to provide a degree of corrosion protection to the underlying metal.
ISO 9866 Hot Flat Bed Press Ironing Tester
Hot Flat Bed Press. A simple heated and thermostatically controlled ironing press for use in testing stability and durability to hot pressing.
Related Testing Standard:ISO 9866
- Home
- Products
- ELECTROMECHANICAL UNIVERSAL TESTING MACHINE
- HYDRAULIC UNIVERSAL TESTING MACHINE
- CIVIL ENGINEERING INSTRUMENT
- TEXTILE TESTING MACHINE
- DYNAMIC TESTING MACHINE
- HARDNESS TESTER
- IMPACT TESTING MACHINE
- NDT Instrument
- LEATHER AND FOOTWEAR TESTING MACHINE
- COMPRESSION TESTING MACHINE
- PLASTIC TESTING INSTRUMENT
- HORIZONTAL TESTING BED
- CUPPING TESTING MACHINE
- REBAR TENSILE AND BENDING TESTING MACHINE
- TORSION TESTING MACHINE
- TESTING MACHINE ACCESSORIES
- METALLURGICAL EQUIPMENT
- About Us
- News
- Contact Us
