WDW Computerized Electromechanical Universal Testing Machine
- Testing Standard:GB, ISO, JIS, DIN and ASTM, etc.
- Â Testing material:Testing material:paper, rubber, plastic, cable wire, filament, thin films, adhesives, foam, packaging, composite material, plastic profile, spring
- Testing Type:Tensile,compression, bending, peeling and tearing, etc test
- Description
- Inquiry
Features
- Computer controlled, load, displacement, extension three closed loop control.
- Real time displays various testing curve, load-time, load-extension, stress-strain, load-displacement, etc.
- It includes many kinds of controlling modes, such as constant force, constant displacement, constant deformation, etc.
- Control software can automatically figure out tensile strength, yield strength, modulus of elasticity, extend rate after rupture, non-proportional extend strength Rp0.2, etc.
- Limit position switches protect over stroke, over load protection
- Testing results can be printed by a HP printer
- Computerized Electromechanaical Universal Testing Machine Â
Main Technical Parameters:
             | WDW-0.5 | WDW-1 | WDW-2 | WDW-5 |
Force Range (kN) | 0.01-0.5 | 0.02-1 | 0.04-2 | 0.10-5 |
Force Accuracy | ±1% of applied force | |||
Position Resolution (mm) | 0.001 | |||
Test Speed Range | 0.01mm/min- 500mm/min, servo control | |||
Crosshead Travel (mm) | 800 | |||
Power Requirement | 1 phase, 220V±10%, 50Hz | |||
Environmental Requirements | Room temperature~40℃, relative humidity<80% | |||
Frame Dimension (mm) |  530×270×1450 | |||
Frame Weight (kg) | 180 |