Dynamic Fatigue Tester Dynamic Fatigue Testing Machine
Dynamic Fatigue Testing Machine
Application:Metals, non-metallic materials and small movable member, the static mechanical properties
Testing Type:It can do tensile, compression, bending, low cycle and high cycle fatigue, crack growth, fracture mechanics test under sine, triangle, square wave, trapezoidal wave, random wave, combination waveform.
Electric digital Soil California Bearing Ratio Testing Machine CBR Tester
Electric digital Soil California Bearing Ratio Testing Machine CBR Tester is suitable for test of soils and mix materials (the grain size of the soil is less than 40mm) compacted with CBR mold so as to confirm the bearing loading ability of pavement, roadbed subcrust as well as material layer of the roadbed to be designed.It consists of a double column frame, a force sensor, a through bar, a loading plate, a displacement sensor and an expansion increment measuring device.
Electrical Fast Transient EFT Generator Meet IEC61000-4-4
Switching the transient process (to cut off inductive load, relay contact bounce, etc) usually interferes with other electrical and electronic equipment in the same circuit. This type of interference is characterized by high amplitude, short rise time, high repetition rate and low energy. Pulse generators are used for evaluating the performance of electrical and electronic equipment power supply port, signal, control and grounding ports when subjected to electrical fast transient burst interference.
EFT generator EFT61004TA is designed for EFT immunity test requirement. The test is intended to demonstrate the immunity of electrical and electronic equipment when subjected to types of transient disturbances such as those originating from switching transients (interruption of inductive loads, relay contact bounce, etc.).The instrument meets the latest standard IEC61000-4-4 ,with high reliability, stable performance, user-friendly design and many other features.
Electromechanical Universal Testing Machine Testing Accessories
Electromechanical Universal Testing Machine Testing Accessories
Electronic Analytical Balance
Electronic Single Fiber Tensile Strength Testing Machine
Electronic Single Fiber Tensile Strength Testing Machine
Testing Standard:ISO 5079; ISO 11566; ASTM D3822; BS 4029
Electronic Yarn Tension Meter
Electronic Yarn Tension Meter
EMC Testing Device ESD EFT Surge combined Simulator
- ESD, EFT, and SURGE, three functions combined into a single, more cost-effective
- Built-in international standards level parameters and user models parameters,very convenient
- LCD display, Intelligent control, Use the Programmable imported high-voltage power supply, Reliable performance
- Built-in intelligent couping/decoupling network. Testing safely
- Built-in the RS232 interface ,Remote operated by the optional control software.
EMC Testing Equipment 10 KV Surge Simulator
- Fully compliant with the latest standards of IEC61000-4-5
- Large LCD interface display, Chinese or English menu, easy to use
- LCD display, Intelligent control, Use the Programmable imported high-voltage power supply, Reliable performance
- Programmable operation by a key setting
- Built-in international standards level parameters and user models parameters, simple
- Built-in intelligent couping / decoupling network. Testing safety
- Impulse injected the phase angle asynchronous or 0-360 ° free to set
- The surge test Fully automatic switching without human operation
- Built-in the RS232 interface ,Remote operated by the optional control software.
EN ISO 12945.1 Orbitor Pilling and Snagging Tester
Orbitor Pilling and Snagging Tester. To determine the surface fuzzes and pilling properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc.
Relative Testing Standard: EN ISO 12945-1 and BS 5811, etc.
EN ISO 13287 SATRA TM144 Footwear Slip Resistance Tester
Footwear slip resistance tester is used to determine the slip resistance of conventionally soled safety, protective and occupational footwear on different floors (such as ceramic tile, stainless steel or carpet). It is not applicable to special purpose footwear containing spikes, metal studs or similar.
Related Testing Standard:EN ISO 13287, SATRA TM144
EN ISO 20344 Shoe Socks Water Proofness Water Penetration Testing Machine
Shoes Water Penetration Test Apparatus is used to test waterproof performance of rubber face and shoes lining of rubber shoes.
Related Testing Standard:EN ISO 20344
- Home
- Products
- ELECTROMECHANICAL UNIVERSAL TESTING MACHINE
- HYDRAULIC UNIVERSAL TESTING MACHINE
- CIVIL ENGINEERING INSTRUMENT
- TEXTILE TESTING MACHINE
- DYNAMIC TESTING MACHINE
- HARDNESS TESTER
- IMPACT TESTING MACHINE
- NDT Instrument
- LEATHER AND FOOTWEAR TESTING MACHINE
- COMPRESSION TESTING MACHINE
- PLASTIC TESTING INSTRUMENT
- HORIZONTAL TESTING BED
- CUPPING TESTING MACHINE
- REBAR TENSILE AND BENDING TESTING MACHINE
- TORSION TESTING MACHINE
- TESTING MACHINE ACCESSORIES
- METALLURGICAL EQUIPMENT
- About Us
- News
- Contact Us
