AATCC 183 Fabric Textile Ultraviolet Ray Tester
UPF and UV Penetration Protection Measurement System .Determine the ability to block UVR and measure UPF of fabric directly.
Ralatived Testing Standard:AATCC 183 AS/NZS 4399
AATCC 35 Rain Tester
Rain Tester is used to determine the penetration resistance of fabrics or composites at different intensities of water impact. Simulated rain horizontally impacts fabric samples mounted vertically in a stainless steel bath
Related Testing Standard:AATCC 35
AATCC Accelerotor Abrasion Tester Comply AATCC 93
AATCC Textile and Fabric Rotary Vertical Crockmeter
AATCC Textile and Fabric Rotary Vertical Crockmeter used to determine the amount of color transferred from the surface of colored textile materials to other surfaces by rubbing. It is applicable to textiles made from all fibers in the form of yarn or fabric, whether dyed, printed or otherwise colored and especially to prints where the singling out of areas amaller than possible to test with the standard AATCC Crockmeter (AATCC Method 8) is required.
AC DC Magnetic Particle Yoke Flaw Detector
AC DC Magnetic Particle Yoke Flaw Detector has AC, DC, AC and DC dual-purpose magnetic particle flaw detector. The DC power supply is rechargeable battery, which is suitable for field operation without power supply and high-voltage inaccessible containers, bridges, pipelines and other field operations. The continuous working time of one charging can reach more than 6 hours. The AC power supply adopts ~ 220 V power supply for direct input without other instruments. It is easy to operate, simple, light weight and easy to carry.
Acceleration Mechanical Shock Test Machine/Acceleration Impact Testing Machine
Acceleration Mechanical Shock Test Machine/Acceleration Impact Testing Machine It is mainly used in the research and production of aerospace, aviation, ships, weapons, electronics, automobiles and other industrial fields to assess the impact resistance of products. It is suitable for testing the impact test of devices, components and complete machines with large impact acceleration. IS is a fully automatic mechanical shock test system, used to measure and determine the impact resistance of products or packaging. IS can perform conventional half-sine wave, square wave, sawtooth wave and other waveform impact tests to realize the product in the actual environment. Suffered shock wave and shock energy, so as to improve the system or optimize the product packaging structure
Adhesion Rolling Ball Tack Strength Tester
Primary Adhesive Tester is applicable in primary adhesive tests of pressure sensitive adhesive tapes, adhesive bandage (plaster), label, protective films and other products.
Adhesive peeling testing machine
- Adhesive peeling testing machine
- Force range: 30N, 50N,100N,200N
- Test speed:50, 100, 150, 200, 250, 300, 500 mm/min
Asphalt Bitumen Non-nuclear Electronic Density Gauge (EDG)
The EDG-2A non-nuclear asphalt density tester can quickly detect areas where road surface segregation, low density, and unevenness occur. The use of electromagnetic induction technology instead of nuclear source radiation method, low cost, high security, users do not have to worry about cumbersome environmental assessment applications, time-consuming training, and strict transportation control. The calibration is simple, the precision is high, the repeatability is good, the touch screen operation, the user can complete the relevant operation training in a short time, and master the technology of on-site quality inspection.
Asphalt Bitumen Thin Film Rotation Oven
Asphalt Bitumen Thin Film Rotation Oven/Rotating Bituminous Membrane Drying Oven for Simulates the aging that occurs during the production of hot-mix asphalt mixtures and is used to determine the aging asphalt samples in the test.
Asphalt Paraffin Oil Open Cup Cleveland Flash Point Tester
Laboratory Asphalt Paraffin Oil Open Cup Cleveland Flash Point Tester Used for determining the fl ash and fi re point of petroleum products. It consists of a brass cup mounted on an electric heater with temperature controller. Conforming with the CE European directive, is supplied complete with double linefuse, hot plate control system and thermometer -6 +400°C.
Asphalt Saybolt Viscometers Comply ASTM D88
- Home
- Products
- ELECTROMECHANICAL UNIVERSAL TESTING MACHINE
- HYDRAULIC UNIVERSAL TESTING MACHINE
- CIVIL ENGINEERING INSTRUMENT
- TEXTILE TESTING MACHINE
- DYNAMIC TESTING MACHINE
- HARDNESS TESTER
- IMPACT TESTING MACHINE
- NDT Instrument
- LEATHER AND FOOTWEAR TESTING MACHINE
- COMPRESSION TESTING MACHINE
- PLASTIC TESTING INSTRUMENT
- HORIZONTAL TESTING BED
- CUPPING TESTING MACHINE
- REBAR TENSILE AND BENDING TESTING MACHINE
- TORSION TESTING MACHINE
- TESTING MACHINE ACCESSORIES
- METALLURGICAL EQUIPMENT
- About Us
- News
- Contact Us
